Kodak 8327538 Scanner Feeder Kit
- Scanner Accessories
- SCANNER CONSUMABLE…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
GreenTechLLC
A 230 W replacement lamp for Promethean, Sanyo and Panasonic projectors, rated for 1,500 hours normal or 3,000 hours economy use
This new GreenTech replacement lamp fits Promethean PRM30 and PRM30A models, Sanyo PLC-WL2500 series projectors, and Panasonic PT-TW230 series units. It ships as a complete housing and bulb assembly rated at 230 watts. The lamp serves as a direct substitute for OEM part numbers PRM30-LAMP, POA-LMP141, ET-LAT100 and 6103490847.
Buyers with the exact projector models named above can install this lamp without modification. It is not for users whose projector requires a different wattage or a different OEM part number. Facilities needing longer rated life than 3000 hours in economy mode should look at other options.
The 230 watt power rating is the critical specification that determines compatibility with the projectors listed. Using a lamp with a different wattage can cause overheating, incorrect brightness or premature failure. Verify that the original lamp was rated at 230 watts before ordering.
| Brand | GreenTech |
|---|---|
| Model | PRM30-LAMP, POA-LMP141, ET-LAT100, 6103490847 |
| Part Number | PRM30-LAMP, POA-LMP141, ET-LAT100, 6103490847 |
| Type | Project Lamp |
| Wattage | 230 |
| Lamp Life | 1,500 (Normal) - 3,000 (Economy) Hrs. |
| Compatibility | PROMETHEAN PRM30, PRM30A; SANYO 6103490847, 6103502892, PLC-WL2500, PLC-WL2500A, PLC-WL2500S, PLC-WL2501, PLC-WL2503, PLC-WL2503A, POA-LMP140, POA-LMP141, PRM30A; PANASONIC ET-LAT100, ET-SLMP140, PT-TW230, PT-TW230U, PT-TW230W, PT-TW231R |
The lamp ships as a complete compatible housing and bulb assembly built to replace OEM part numbers PRM30-LAMP, POA-LMP141, ET-LAT100 and 6103490847, so it fits the same projector cavity without alteration.
Power off and unplug the projector, allow it to cool, remove the lamp cover, release the retaining screws, slide out the old module, insert the new PRM30-LAMP until it clicks, re-tighten the screws, replace the cover, then reset the lamp timer in the menu — the timer reset is the step most frequently missed.
Economy mode is rated at 3,000 hours, so schedule a replacement around that interval; Normal mode reaches its limit at 1,500 hours.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?