GreenTechLLC
GreenTechLLC NP18LP NP13LP 225W projector lamp
A 225 W replacement lamp for NEC projectors such as the NP110, NP210 and V300 series, rated for 1,500 hours normal or 3,000 hours economy use
- TypeProject Lamp
- Wattage225 Watt
- Lamp Life1,500 (Normal) - 3,000 (Economy) Hrs.
- CompatibilityNEC NP110, NP110J, NP115, NP115G3D, NP115J, NP13LP, NP210, N
- Height4 in
- Width4 in
- Ready-to-install replacement for NEC NP18LP and NP13LP projectors
- 225 watt lamp delivers up to 3000 hours in economy mode
- Compatible with over thirty NEC models including NP110, NP215 and V300W
- Pre-assembled housing and bulb simplify installation
- Lightweight 0.75 lb unit fits existing mounts
GreenTech 225 W compatible projector lamp
This GreenTech replacement lamp delivers 225 watts of power for NEC projectors that use the NP18LP or NP13LP module. It fits a wide range of models including the NP110, NP115, NP210, NP215, NP216 and V-series units. The lamp ships new in a compatible housing with the bulb pre-installed. Buyers who need an original NEC-branded module should look elsewhere.
Replaces OEM NP18LP and NP13LP modules
The lamp directly substitutes the original NP18LP and NP13LP part numbers listed for the compatible NEC projectors. Switching to this unit makes sense when the existing lamp has reached its rated hours or when brightness has dropped below usable levels. It is not intended for projectors that require a different wattage or a different housing design.
1 500 hours normal mode and 3 000 hours economy mode
In normal operation the lamp is rated for 1 500 hours before replacement is recommended. Economy mode extends the rated life to 3 000 hours by reducing output, which also lowers heat stress during long sessions. Sustained use at full power will gradually reduce brightness as the lamp ages.
Highlights
- Ready-to-install replacement for NEC NP18LP and NP13LP projectors
- 225 watt lamp delivers up to 3000 hours in economy mode
- Compatible with over thirty NEC models including NP110, NP215 and V300W
- Pre-assembled housing and bulb simplify installation
- Lightweight 0.75 lb unit fits existing mounts
Specifications
| Brand | GreenTech |
|---|---|
| Model | NP18LP, NP13LP |
| Part Number | NP18LP, NP13LP |
| Type | Project Lamp |
| Wattage | 225 Watt |
| Lamp Life | 1,500 (Normal) - 3,000 (Economy) Hrs. |
| Compatibility | NEC NP110, NP110J, NP115, NP115G3D, NP115J, NP13LP, NP210, NP210J, NP215, NP-215J, NP216, NP-216J-3D, NP-260WJD, NP-260WJD-N, NP-V230JD, NP-V260JD, NP-V260XJD, NP-V260XJD-N, NP-V281WJD, NP-V300W, NP-V300WJD, NP-V300WJD-N, NP-V300X, NP-V300XJD, NP-V300XJD-N, NP-V311WJD, NP-V311XJD, NP-VE280, NP-VE280X, NP-VE281, NP-VE281X, NP-VE282, NP-VE282X, V230X, V260, V260X, V281W, V300W, V300WG, V300X, V311W, V311X, VE280, VE280X, VE281, VE281X, VE282, VE282X, 6003259, 9NAT001 |
| Height | 4 in |
| Width | 4 in |
| Depth | 4 in |
| Weight | 0.75 lb |
Questions about this item
What are the dimensions of the NP18LP lamp housing so I can confirm it fits my NEC projector?
The GreenTech NP18LP lamp housing measures 4 inches in height, width and depth, matching the original NP13LP form factor for the listed NEC models.
How do I install the NP18LP lamp and what step is often missed?
Power off and unplug the projector, remove the lamp cover, unscrew the old module, insert the new NP18LP housing until it seats firmly, replace screws and cover, then reset the lamp timer in the menu — skipping the timer reset is the common error.
When will the 225 watt NP18LP lamp need replacement based on its rated life?
The lamp is rated for 1,500 hours in normal mode or 3,000 hours in economy mode; plan replacement when the projector warning appears or brightness drops noticeably.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



