GreenTechLLC
GreenTechLLC DT01191 projector lamp 210W
Compatible 210 W replacement lamp rated 1500 normal and 3000 economy hours for Hitachi, Dukane and 3M projectors
- TypeProject Lamp
- Wattage210
- Lamp Life1,500 (Normal) - 3,000 (Economy) Hrs.
- Compatibility3M 78-6972-0106-5, X21i, X26i; DUKANE 456-8794H, I-Pro 8794H
- Replaces OEM part numbers DT01191, DT01195 and DT01241 directly
- 210 watt lamp powers compatible Hitachi and Dukane projectors
- Economy mode extends usable life to 3000 hours
- Fits 3M models X21i and X26i without modification
- Compatible housing and bulb arrive ready to install
Compatible replacement lamp
This GreenTechLLC DT01191 projector lamp is a brand new compatible unit rated at 210 W. It replaces OEM part numbers DT01191, DT01195 and DT01241 and fits a range of Hitachi, Dukane and 3M projectors including the CP-RX94, CP-X2021, CP-X2521 and CP-X3021 series. The lamp ships with housing and bulb pre-assembled for direct installation.
Housing and bulb assembly
The lamp arrives as a complete housing-and-bulb module so no separate bulb handling is required during replacement. Alignment features match the original OEM design, allowing the unit to seat securely in the projector’s lamp compartment without modification. This mechanical compatibility covers the listed Hitachi CP-X2021WN, CP-X2521WN and CP-X3021WN models as well as the Dukane I-Pro 8794H-RJ and I-Pro 8795H-RJ units.
Rated life and power draw
At 210 W the lamp draws the same power as the original component, preserving the projector’s thermal profile and fan behaviour. Rated life is 1,500 hours in normal mode and 3,000 hours in economy mode, giving a clear interval for scheduled maintenance. Users who need longer continuous operation or higher brightness than the rated output will require a different lamp solution.
Highlights
- Replaces OEM part numbers DT01191, DT01195 and DT01241 directly
- 210 watt lamp powers compatible Hitachi and Dukane projectors
- Economy mode extends usable life to 3000 hours
- Fits 3M models X21i and X26i without modification
- Compatible housing and bulb arrive ready to install
Specifications
| Brand | GreenTech |
|---|---|
| Model | DT01191, DT01195, DT01241 |
| Part Number | DT01191, DT01195, DT01241 |
| Type | Project Lamp |
| Wattage | 210 |
| Lamp Life | 1,500 (Normal) - 3,000 (Economy) Hrs. |
| Compatibility | 3M 78-6972-0106-5, X21i, X26i; DUKANE 456-8794H, I-Pro 8794H-RJ, I-Pro 8795H-RJ, Imagepro 8794H-RJ, ImagePro 8795H-RJ; HITACHI CP-RX94, CP-X2021, CP-X2021WN, CP-X2521, CP-X2521WN, CP-X3021, CP-X3021WN, DT01195, DT01241 |
Questions about this item
What wattage does the DT01191 lamp draw, and how does that limit brightness in normal use?
The lamp is rated at 210 W, which sets the light output ceiling for the Hitachi CP-X2021 and CP-X3021 series when run in normal mode.
Which screw pattern and housing dimensions must match for the DT01191 to seat in a Dukane I-Pro 8794H-RJ?
The module uses the same housing and bulb assembly as OEM part DT01191, so it aligns with the original screw holes and latch points on the Dukane I-Pro 8794H-RJ.
After sliding the DT01191 into a Hitachi CP-X2521, what reset step is often missed?
Many installers forget to reset the projector's lamp-hour counter through the on-screen menu, so the replacement lamp still shows the old usage time.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
ID TECH IDMB-333133B credit card reader
- MagStripe Reader
- Keyboard Wedge
Brother TZES121 9mm Black on Clear Extra Strength Adhesive Tape pos accessory
- Label Accessories
- Black on Clear Indu…
Intermec E23067 DuraTran II Gloss Polyester Thermal Transfer Labels pos accessory
- Thermal Transfer Pr…
- Desktop



