Greenlee
Greenlee 925 Hole Cutter 1 3/4 in HSS 3/8 in Hex hand tool
Cuts 1 3/4 in holes in sheet metal with a 14-tooth high-speed steel design and 3/8 in hex shank
- TypeHand Saws
- Cuts sheet metal cleanly with high-speed steel teeth
- 14 teeth per cutter for smooth material removal
- 1/4 in maximum cutting depth for shallow holes
- 3/8 in hex shank fits standard drill chucks
- Impact rated no for controlled hand-tool use
Greenlee 925 Hole Cutter 1 3/4 in
The Greenlee 925 is a high-speed steel hole cutter designed for cutting sheet metal. It features a 1 3/4 inch saw diameter with 14 teeth and a maximum cutting depth of 1/4 inch. The tool includes an arbor and uses a 1/2 inch hex shank with a 3/8 inch thread size. It is a new hand tool intended for metalworking applications.
Suited for sheet metal fabrication
This cutter suits professionals and hobbyists drilling holes in sheet metal up to 1/4 inch thick using a standard drill chuck. It is not for buyers who need to cut thicker plate, larger diameters, or materials like wood and plastic. Impact-rated drilling is not supported, so users requiring an impact driver compatible tool should look elsewhere.
Verify drill compatibility before ordering
Check that your drill accepts a 1/2 inch hex shank and can run at speeds suitable for high-speed steel in metal. Ensure the workpiece thickness does not exceed the 1/4 inch maximum cutting depth. Confirm you have appropriate cutting lubricant and clamps to secure the sheet metal safely during operation.
Highlights
- Cuts sheet metal cleanly with high-speed steel teeth
- 14 teeth per cutter for smooth material removal
- 1/4 in maximum cutting depth for shallow holes
- 3/8 in hex shank fits standard drill chucks
- Impact rated no for controlled hand-tool use
Specifications
| Brand | Greenlee |
|---|---|
| Type | Hand Saws |
Questions about this item
What size drill chuck is needed to hold the 1/2 in Hex shank?
A drill chuck that accepts a 1/2 inch hex shank is required to secure the cutter.
Can the 14-tooth high-speed steel cutter be used in a standard drill for sheet metal?
Yes, the 14-tooth HSS cutter is designed for sheet metal and fits a 3/8 inch hex drive in a standard drill.
How do I verify the cutter is producing a clean 1/4 in deep hole in metal?
Inspect the cut edge for a smooth finish and measure the depth to confirm it reaches the 1/4 inch maximum.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
