Greenlee
Greenlee 7212SP-1-1/2P Speed Punch 1-1/2 in 10 ga hand tool
Punches 1-1/2 inch conduit holes in up to 10 gauge mild steel, aluminium, fibreglass or plastic with a slug-free design that speeds setup threefold
- TypeHand Held Punches
- MaterialHAWA
- Weight0.78
- Punches 1-1/2 in conduit holes in 10 ga steel
- Slug falls free for faster cleanup after punching
- Up to 3 times faster setup and disassembly
- Works with LS50L11SP and 7906SBSP driver kits
- Lightweight 0.78 lb design reduces operator fatigue
Greenlee Speed Punch 1-1/2 in
The Greenlee 7212SP-1-1/2P is a hand-held knockout punch designed to create a 1.951 in hole for 1-1/2 in conduit. It punches mild steel up to 10 gauge as well as aluminum, fiberglass or plastic. The slug falls free during operation. It is built for electricians and maintenance crews who need fast, repeatable holes in enclosures and panels.
Fits LS50L11SP and 7906SBSP drivers only
This punch requires Greenlee LS50L11SP or 7906SBSP punch driver kits to operate. It will not work with hydraulic drivers, ratchet sets or other brand systems. Buyers who need a self-contained manual tool or who use a different driver platform should look at another punch style.
10 ga mild steel maximum capacity
The decisive limit is the 10 gauge mild steel rating; thicker material will not punch cleanly. The tool weighs 0.78 lb and uses HAWA material construction. If your project demands heavier gauge capacity, this model is not suitable.
Highlights
- Punches 1-1/2 in conduit holes in 10 ga steel
- Slug falls free for faster cleanup after punching
- Up to 3 times faster setup and disassembly
- Works with LS50L11SP and 7906SBSP driver kits
- Lightweight 0.78 lb design reduces operator fatigue
Specifications
| Brand | Greenlee |
|---|---|
| Model | 7212SP-1-1/2P |
| Type | Hand Held Punches |
| Material | HAWA |
| Weight | 0.78 |
Questions about this item
Will the 1-1/2 in punch work with my existing LS50L11SP or 7906SBSP driver kits?
Yes, this Speed Punch is designed for use with both the LS50L11SP and 7906SBSP punch driver kits for fast setup and disassembly.
How can I confirm the 1.951 in hole is punched cleanly in 10 ga mild steel?
The slug falls free automatically when the punch completes its stroke, leaving a clean 1.951 in hole in mild steel, aluminium, fibreglass or plastic.
Does the 7212SP-1-1/2P include a driver or draw stud in the box?
The package contains the Speed Punch unit only; a compatible driver kit such as the LS50L11SP or 7906SBSP must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
