Greenlee
Greenlee 7212 knockout die 57/64 in 10 ga tool storage
Knockout die cuts 57/64 in holes in 10 ga aluminium, brass, copper, fiberglass, mild steel or plastic
- Creates clean 57/64 in holes in 10 ga steel
- Splitting slug falls free for fast removal
- Works with battery and manual hydraulic drivers
- Cuts aluminum, brass, copper, fiberglass and plastic
- Greenlee Speed Punch series built for pro use
Greenlee 7212 Knockout Die 57/64 in 10 ga
The Greenlee 7212 knockout die creates clean 57/64 inch holes in materials up to 10 gauge thickness. It works with battery-hydraulic and manual-hydraulic punch drivers. The slug splits in half and falls free from the die.
Suitable materials and driver types
This die handles aluminum, brass, copper, fiberglass, mild steel and plastic at 10 gauge capacity. It fits Speed Punch series drivers. Builders needing a draw stud included or a different hole size should look elsewhere.
Nominal hole size 57/64 inch
The nominal hole size is 57/64 inch with an exact diameter of 1 19/20 inch. This single measurement determines whether the die matches the conduit or fitting you are installing.
Highlights
- Creates clean 57/64 in holes in 10 ga steel
- Splitting slug falls free for fast removal
- Works with battery and manual hydraulic drivers
- Cuts aluminum, brass, copper, fiberglass and plastic
- Greenlee Speed Punch series built for pro use
Specifications
| Brand | GREENLEE |
|---|
Questions about this item
Should I choose this 57/64 in die or another size for my project?
Select the 57/64 in die when you need a 1 19/20 in finished hole in 10 ga steel, aluminum, brass, copper, fiberglass or plastic; choose a different nominal size for any other hole diameter.
What does the 57/64 in nominal size mean once the die is in the tool?
It produces a round 1 19/20 in diameter hole in a single operation, and the slug splits in half to fall free from the die and stud without jamming.
Which hydraulic tools accept this Speed Punch die and what limits apply?
The die works with battery-hydraulic and manual-hydraulic drivers in the Speed Punch series; it cuts up to 10 ga mild steel or aluminum and requires a separate draw stud.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
