Greenlee
Greenlee 613 Conduit Piston 2 in
A foam conduit piston that fits 2-inch EMT, IMC and rigid conduit for cable-pulling jobs
- Type3" Harsh Environment, Hook-and-Loop Closure
- ColorGreen
- Designed for 2 in conduit compatibility
- Foam construction protects cable surfaces during pulls
- Greenlee blower/vacuum series integration ready
- Bright green colour aids quick identification
- Durable build suited for harsh environments
Conduit Piston 613
The Greenlee 613 conduit piston is a foam accessory designed for pulling cable through conduit runs. It fits EMT, IMC and rigid conduit types and works with compatible Greenlee blower or vacuum equipment. Installers use it to move a pull line or rope through the raceway efficiently.
Two-Inch Conduit Compatibility
This piston is sized for 2 in conduit, matching the stated compatible conduit size in the specifications. The overall length, height and width are each 2 in, so the part only fits that specific trade size. Selecting the correct diameter is the single specification that determines whether the piston will seat and travel properly.
Foam Construction and Pulling Headroom
The foam body compresses to form a seal against the conduit wall, providing enough surface area to push a pull line through typical 2 in runs. It handles standard cable bundles and moderate bends within that diameter. Very long distances, heavy cable loads or tight-radius elbows may exceed the pushing force the foam piston can sustain.
Highlights
- Designed for 2 in conduit compatibility
- Foam construction protects cable surfaces during pulls
- Greenlee blower/vacuum series integration ready
- Bright green colour aids quick identification
- Durable build suited for harsh environments
Specifications
| Brand | Greenlee |
|---|---|
| Model | 613 |
| Type | 3" Harsh Environment, Hook-and-Loop Closure |
| Color | Green |
Questions about this item
How does the 2 in overall length perform once the piston is inside a conduit run?
The 2 in overall length lets the foam piston seat fully in 2 in EMT, IMC or rigid conduit so the blower or vacuum can push or pull a pull-line through the entire run without the piston bypassing bends.
What blower or vacuum series does the piston work with, and what does that connection limit?
It is compatible only with Greenlee blower/vacuum series, so the proprietary coupling caps use to Greenlee equipment — other brands will not attach.
What does the foam body need to fit and mount inside the conduit?
The 2 in diameter foam body fits 2 in EMT, IMC and rigid conduit; no extra hardware is required — the piston simply slides in and seals against the conduit wall.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Viking Electronics K-1500-6A Panel Telephone
- Viking Vandal Resis…



