Greenlee
Greenlee 0351-08-INS insulated long-nose plier with cutter
Insulated long-nose plier with cutter, rated to 1,000 V for live electrical work
- TypePliers
- Insulated to 1,000 V for safe live-line work
- Long needle-nose jaws reach deep into tight spaces
- Built-in cutter and stripper handle wire prep in one tool
- High-leverage design multiplies grip force with less effort
- Cushion-grip handles reduce fatigue during extended use
Insulated Long-Nose Pliers with Cutter
The Greenlee 0351-08-INS is a new hand tool built for electrical work up to 1,000 V. Its needle-nose jaws measure 2 1/4 in and end in a 1/8 in tip, while a built-in cutter and stripper sit behind the pivot. High-leverage action reduces the effort needed for cutting wire, grabbing and looping. Orange cushion grips provide comfort and visible identification on the job.
For Electricians Working on Live Circuits
The 1,000 V insulation rating and long reach suit electricians who must bend, cut and strip conductors inside panels or enclosures. The fixed straight jaws and single pivot will not satisfy technicians who need adjustable jaw widths, angled access or a dedicated crimping die. Users requiring ESD-safe handles or non-sparking materials for hazardous atmospheres should select a different model.
1,000 V Voltage Rating
The double-insulated construction is tested to 1,000 V and meets the safety standard that governs live-line hand tools. This rating is the decisive specification; without it the pliers cannot be used on energised conductors. Verify that your work procedures require this voltage class before purchase.
Highlights
- Insulated to 1,000 V for safe live-line work
- Long needle-nose jaws reach deep into tight spaces
- Built-in cutter and stripper handle wire prep in one tool
- High-leverage design multiplies grip force with less effort
- Cushion-grip handles reduce fatigue during extended use
Specifications
| Brand | Greenlee |
|---|---|
| Model | 0351-08-INS |
| Type | Pliers |
Questions about this item
Which length of these Greenlee insulated long-nose pliers should I choose?
The 0351-08-INS model is 8-3/4 inches long overall, with a 2 1/4 inch jaw length and 2 inch maximum opening for reach and grip.
What does the 1,000 V rating mean when I am using the pliers on live circuits?
The handles are insulated and tested to 1,000 V, so they protect against shock up to that voltage when the insulation is undamaged and dry.
What standard does the insulation meet and what does it limit in practice?
The pliers carry a 1,000 V insulation rating, limiting safe use to circuits at or below that voltage when the cushion grips are intact.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



