Greenlee
Greenlee 0153-11-INS insulated slotted hand screwdriver 1/4 in
Insulated slotted screwdriver with a 1/4 in tip for live electrical work
- TypeScrewdrivers
- Color/FinishInsulated, Orange/Yellow
- Handle MaterialSteel
- Insulated shaft protects against live circuits
- 1/4 in slotted tip fits standard fasteners
- Ergonomic handle reduces fatigue during extended use
- 8 1/4 in overall length provides good reach
- Black oxide tip finish resists wear
Insulated slotted screwdriver 1/4 in
The Greenlee 0153-11-INS is a new insulated slotted hand screwdriver with a 1/4 inch tip. It has an overall length of 8 1/4 inches and features a steel handle with an orange and yellow insulated coating. The tip finish is black oxide and the shank is insulated for electrical work.
Who this suits and who should look elsewhere
Electricians and technicians needing an insulated slotted driver for live circuits up to the rated voltage will find this tool appropriate. Buyers who need a Phillips or Torx tip, a magnetic tip for holding screws, a non-sparking rating for hazardous atmospheres, or an ESD-safe handle for sensitive electronics should look at other models.
Insulated shank and 1/4 inch slotted tip
The insulated shank and 1/4 inch slotted tip are the key specifications that determine if this driver matches the fastener and safety requirements of the job. The black oxide tip finish provides corrosion resistance on the working surface. The steel handle core gives mechanical strength while the insulation protects the user.
Highlights
- Insulated shaft protects against live circuits
- 1/4 in slotted tip fits standard fasteners
- Ergonomic handle reduces fatigue during extended use
- 8 1/4 in overall length provides good reach
- Black oxide tip finish resists wear
Specifications
| Brand | Greenlee |
|---|---|
| Model | 0153-11-INS |
| Type | Screwdrivers |
| Color/Finish | Insulated, Orange/Yellow |
| Handle Material | Steel |
Questions about this item
What tip size does the 1/4 in slotted driver fit?
The 1/4 in tip fits slotted fasteners with a matching 1/4 in slot width.
What handle and shank dimensions allow it to reach into tight spots?
An 8 1/4 in overall length with an insulated round shank clears deep recesses while keeping the grip outside the work area.
How do you confirm the insulation is intact before live work?
Visually inspect the orange and yellow coating for cracks or wear; any damage means the tool must be replaced.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
