Greenfield Threading
Greenfield Threading 174560 3pc HSS Taper Plug Bottoming Hand Tap M3.5x0.60 pneumatic accessory
Three-piece HSS hand-tap set cuts M3.5×0.60 metric threads in taper, plug and bottoming styles
- Three-piece HSS tap set covers taper, plug and bottoming threads
- Metric M3.5 × 0.60 thread size fits precision fastening tasks
- High-speed steel construction resists wear for longer tool life
- Bright uncoated finish suits general-purpose threading applications
- Compact 2 in overall length allows access in tight spaces
Greenfield Threading M3.5 Tap Set
This three-piece hand tap set cuts M3.5 x 0.60 metric threads in a single operation. It suits mechanics and machinists who need to create or repair internal threads in maintenance or light production work.
HSS Bright Uncoated Threading Limits
High-speed steel construction with a bright uncoated finish handles general-purpose materials but wears faster in abrasive or high-alloy stock. The D4 thread limit and 6H class of fit define the tolerance window, so holes outside this range will not gauge correctly.
Straightforward Installation With Common Risks
The 11/16 inch thread length and 2 inch overall length fit standard tap wrenches and holders. Misalignment during starting, insufficient lubrication, or forcing the bottoming tap too deep are the typical causes of broken flutes or oversized threads.
Highlights
- Three-piece HSS tap set covers taper, plug and bottoming threads
- Metric M3.5 × 0.60 thread size fits precision fastening tasks
- High-speed steel construction resists wear for longer tool life
- Bright uncoated finish suits general-purpose threading applications
- Compact 2 in overall length allows access in tight spaces
Specifications
| Brand | CHICAGO-LATROBE |
|---|
Questions about this item
Should I use the taper, plug or bottoming tap first for an M3.5x0.60 thread?
Start with the taper tap to begin the thread, follow with the plug tap for deeper engagement, and finish with the bottoming tap to reach the bottom of a blind hole.
What does the 11/16 inch thread length mean when I am tapping a hole?
The cutting portion of each tap is 11/16 inch long, so you can cut threads up to that depth in a single pass before clearing chips.
What does the D4 thread limit on these metric taps control?
The D4 limit sets the pitch-diameter tolerance so the finished M3.5x0.60 thread meets the 6H class of fit for a standard right-hand metric hole.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
