We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

GREENCYCLE

GREENCYCLE Junction Box ABS IP66 Grey 181x111x100mm 20mm Gland

SKU CH-KB4P-6MGMN

ABS enclosure rated IP66 for dust and water-jet protection with up to ten 20 mm gland entries

  • TypeWeatherproof Boxes
  • ETL Safety ListingYes
  • CE Safety ListingYes
  • MaterialABS
  • ShapeRectangle
  • IP66 rating shields wiring from dust and powerful water jets
  • ABS construction with fire-retardant properties resists corrosion and UV exposure
  • Up to ten 20 mm cable-gland entries on four sides for flexible routing
  • Rubber gasket under screw-down lid maintains seal in harsh weather
  • ETL and CE safety listings confirm compliance for outdoor installations

Weatherproof Enclosure for Outdoor Wiring

The GREENCYCLE junction box is an IP66-rated ABS enclosure built to protect electrical connections from dust, water jets and corrosion in harsh outdoor environments. It is suited for installers and engineers who need a durable, surface-mounted housing for projects in industrial, marine or construction settings.

Sealed Cover with DIY Cable Entries

A rubber sealing strip sits in the lid groove and four screws clamp the cover shut, maintaining the IP66 seal once the box is closed. Up to ten 20 mm gland holes can be drilled across the four sides, letting the installer route cables exactly where the project demands while keeping the enclosure watertight.

IP66 Rating and 20 mm Gland Compatibility

The single specification that decides fit is the IP66 ingress protection combined with M20×1.5 mm cable-gland entry points. If the installation requires a lower IP rating, larger gland sizes or a non-surface mounting method, this enclosure will not meet those needs.

Highlights

  • IP66 rating shields wiring from dust and powerful water jets
  • ABS construction with fire-retardant properties resists corrosion and UV exposure
  • Up to ten 20 mm cable-gland entries on four sides for flexible routing
  • Rubber gasket under screw-down lid maintains seal in harsh weather
  • ETL and CE safety listings confirm compliance for outdoor installations

Specifications

TypeWeatherproof Boxes
ETL Safety ListingYes
CE Safety ListingYes
MaterialABS
ShapeRectangle

Questions about this item

Will the rubber sealing strip on the cover need replacing over time?

The cover uses a rubber sealing strip in its groove to maintain the IP66 seal; rubber can degrade with prolonged UV exposure, so inspect it periodically and replace if it hardens or cracks.

How many 20 mm cable gland entries can I actually use before the box gets too crowded?

Up to 10 holes can be drilled across the four sides for M20×1.5 mm glands, but internal space is 172×100×90 mm, so wiring density will become the practical limit.

Does the ABS enclosure get hot when mounted in direct sunlight all day?

ABS is rated for outdoor use and the grey finish reflects some heat, but the material has no active cooling; surface temperature will follow ambient conditions and solar load.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.