We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White heat-shrink label cassette, 8.8mm wide, black print, 1.5m roll

GREENCYCLE

GREENCYCLE AHS-221 8.8mm 1.5m Heat Shrink Label Tape

SKU CH-WQNE-R130W MPN AHS-221

Heat-shrink label tape prints black on white, shrinks 2:1 to fit 2.6–5.1 mm cables, and works with Brother P-touch label makers

  • TypeLabels
  • Featuresheat shrink rate is 2:1 and can be used for cables in diamet
  • ColorBlack on White
  • Sizes/Dimensions9mm (0.35")
  • Quantity1 each
  • SpecificationsCompatible for Brother P-touch PT-D210 H110 H100 D450 D400 D
  • Heat-shrink 2:1 ratio fits cables from 2.6mm to 5.1mm diameter
  • Waterproof, chemical, abrasion, temperature and fade resistant for indoor or outdoor use
  • 5m continuous tape lets you cut custom label lengths
  • 8mm wide black-on-white print on Brother P-touch label makers
  • Compatible with PT-D210, PT-H110, PT-D450, PT-P700 and many other models

Compatible heat-shrink label tape

GREENCYCLE AHS-221 supplies black-on-white print on a continuous 1.5m roll that shrinks 2:1 when heated. The flattened width measures 8.8mm and suits cables from 2.6mm to 5.1mm diameter. Designed for electricians, network installers and hobbyists who need durable wire identification indoors or outdoors.

Check printer model and cartridge slot

Verify that your Brother P-touch machine appears in the compatibility list such as PT-D210, PT-H110, PT-D450, PT-P700 or PT-P710BT. The tape loads as a standard cartridge; no firmware update or adapter is required. Ensure the printer accepts heat-shrink media before ordering.

Resists water chemicals abrasion and fading

After shrinking, the tubing forms a tight sleeve that withstands moisture, solvents, mechanical wear and UV exposure without legibility loss. Print stays readable through repeated handling and temperature cycles in industrial, telecom or domestic environments. Continuous format lets you cut exact lengths for each job.

Highlights

  • Heat-shrink 2:1 ratio fits cables from 2.6mm to 5.1mm diameter
  • Waterproof, chemical, abrasion, temperature and fade resistant for indoor or outdoor use
  • 5m continuous tape lets you cut custom label lengths
  • 8mm wide black-on-white print on Brother P-touch label makers
  • Compatible with PT-D210, PT-H110, PT-D450, PT-P700 and many other models

Specifications

TypeLabels
BrandGREENCYCLE
ModelAHS-221
Featuresheat shrink rate is 2:1 and can be used for cables in diameter 0.1'' to 0.2''.
ColorBlack on White
Sizes/Dimensions9mm (0.35")
Quantity1 each
SpecificationsCompatible for Brother P-touch PT-D210 H110 H100 D450 D400 D600 P700 P710BT Label Maker and so on.
Type SpecificationsTabletop / Industrial
Parts1 Year
Labor1 Year

Questions about this item

What comes in the pack and is anything else needed to print labels?

The pack contains one 1.5 m roll of 8.8 mm black-on-white heat-shrink tube; a compatible Brother P-touch label maker is required to print on it.

How do I pick the right tube size for my wires?

Choose this 8.8 mm tube when your cables are between 2.6 mm and 5.1 mm in diameter; the 2:1 shrink ratio covers that range.

What does the 2:1 shrink ratio mean once the label is on a cable?

The flattened 8.8 mm tube shrinks to roughly half its width, forming a tight, waterproof sleeve that resists abrasion, chemicals and fading on cables from 2.6 mm to 5.1 mm.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.