GREENCYCLE A18053 10 Pack 9mm Heat Shrink Labelmaker Tubes

What the product is and who it is for

GREENCYCLE A18053 supplies ten heat-shrink label tubes that print black text on a white background. Each tube is 9mm wide and 1.5 metres long, giving a 3:1 shrink ratio for wire diameters between 1.73mm and 3.73mm. The pack suits technicians, electricians and network engineers who need durable cable identification in industrial, office or outdoor environments. It is not for users who require labels for cables outside the stated diameter range or for printers not listed as compatible.

What to check on your existing setup before ordering

Verify that your label printer is a Dymo Rhino 4200, 5000, 5200, 6000, ILP-219, 3M PL200, PL300 or Tyco T107M. The tubes will not fit Rhino 1000, Rhino 3000 or 3M PL100 models. Confirm that the cables you intend to mark fall within the 1.73mm to 3.73mm diameter window so the 3:1 shrink ratio seals correctly. No other printer models or cable sizes are supported by this product.

How it fits into a build: what it needs around it.

After printing, apply hot air from a hair dryer or heat gun to shrink the tube tightly onto the wire, creating a waterproof, chemical-resistant and abrasion-resistant mark. The continuous format lets you cut custom lengths for each cable, reducing waste compared with pre-cut labels. The ten-tube pack provides enough stock for large wiring looms, panel builds or field-service kits while eliminating the need for separate adhesive labels that can peel or fade over time.