We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two white cartridges with black print on heat-shrink tape 6mm wide 1.5m long

GREENCYCLE

GREENCYCLE A18051 6mm 1.5m heat-shrink labelmaker tape 2-pack

SKU CH-0SYT-9HVYY MPN A18051

Two-pack of 6 mm heat-shrink label tape shrinks 3:1 to fit 1.18–2.33 mm cables and works with Dymo Rhino 3000, 4200, 5000, 5200, 6000, 3M PL200, PL300 and Tyco T107M printers

  • TypeLabels
  • Featuresheat shrink rate is 3:1 and can be used for cables in diamet
  • ColorBlack on White
  • Sizes/Dimensions6mm (0.23")
  • Quantity2 each
  • SpecificationsCompatible for Dymo Rhino Pro 3000 4200 5000 5200 6000 ILP-2
  • 3:1 shrink ratio fits cables 1.18mm to 2.33mm
  • 5m continuous tape lets you cut custom label lengths
  • Black-on-white print stays readable after heat shrinking
  • Works with Dymo Rhino 3000, 4200, 5000, 5200, 6000
  • Also fits 3M PL200, PL300 and Tyco T107M printers

What it is

This pack contains two continuous heat-shrink label tapes, each 6mm wide and 1.5m long. They print black text on white material and shrink at a 3:1 ratio when heated. Designed for wire and cable identification in industrial, office and home environments.

Build and compatibility

The flattened tubes feed through compatible Dymo Rhino and 3M label makers, including the 3000, 4200, 5000, 5200 and 6000 series plus the PL200 and PL300 models. They also fit the Tyco T107M and ILP-219 printers. The 6mm size does not work with Rhino 1000 or 3M PL100 devices.

Deciding specification

The 3:1 shrink rate covers cables from 1.18mm to 2.33mm in diameter. After printing, apply hot air to shrink the tube tightly onto the wire. If your cables fall outside this diameter range, a different tube size is required.

Highlights

  • 3:1 shrink ratio fits cables 1.18mm to 2.33mm
  • 5m continuous tape lets you cut custom label lengths
  • Black-on-white print stays readable after heat shrinking
  • Works with Dymo Rhino 3000, 4200, 5000, 5200, 6000
  • Also fits 3M PL200, PL300 and Tyco T107M printers

Specifications

TypeLabels
BrandGREENCYCLE
ModelA18051
Featuresheat shrink rate is 3:1 and can be used for cables in diameter from 1.18mm to 2.33mm
ColorBlack on White
Sizes/Dimensions6mm (0.23")
Quantity2 each
SpecificationsCompatible for Dymo Rhino Pro 3000 4200 5000 5200 6000 ILP-219 3M PL200 PL300 and Tyco T107M
Type SpecificationsTabletop / Industrial
Parts1 Year
Labor1 Year

Questions about this item

What shrink ratio does the 6 mm heat-shrink tape use, and what cable diameters does it cover?

The tape shrinks at a 3:1 ratio and fits cables from 1.18 mm up to 2.33 mm in diameter.

Which label printers accept the 6 mm A18051 cartridge?

It works with Dymo Rhino 3000, 4200, 5000, 5200, 6000, 3M PL200, PL300, Tyco T107M and ILP-219; it does not fit Rhino 1000 or 3M PL100.

How do you finish the label after printing so it stays on the wire?

Apply hot air from a hair dryer or heat gun until the tube fully shrinks and adheres around the cable.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.