Great Plains Industries
Great Plains Industries M-1115S-AU pump 115V 12 gpm
Electric drum pump delivers up to 12 gpm flow at 15 psi for diesel, gasoline, kerosene and E15 from 115 V AC power
- Delivers up to 12 gallons per minute for fast fuel transfer
- 15 psi outlet pressure handles diesel, gasoline, kerosene and E15
- Self-priming design with 40 inch suction tube simplifies drum mounting
- Thermal protection safeguards the 115 V AC motor during extended runs
- Automatic nozzle with 12 foot hose provides controlled, hands-free dispensing
Pump purpose and user
The Great Plains Industries M-1115S-AU is an electric drum pump built for transferring diesel, gasoline, kerosene and E15 from drums or tanks. It delivers a maximum flow rate of 12 gpm at 15 psi outlet pressure and operates on 115 V AC power with a 12 ft discharge hose and 40 in suction tube.
Suitable buyers and limits
This pump suits operators who need a self-priming, corded-electric transfer unit with automatic nozzle operation and thermal protection for the listed fuels. It is not for buyers who require variable-speed control, dry-run capability, or a pump rated for fluids outside diesel, gasoline, kerosene and E15.
Setup checks before ordering
Confirm the supply provides 115 V AC at 60 Hz and that the drum or tank opening accepts a 1 in suction tube and bung adapter. Verify the 12 ft hose and 40 in tube reach your fill point, and note the unit carries a California Proposition 65 warning for reproductive-harm chemicals.
Highlights
- Delivers up to 12 gallons per minute for fast fuel transfer
- 15 psi outlet pressure handles diesel, gasoline, kerosene and E15
- Self-priming design with 40 inch suction tube simplifies drum mounting
- Thermal protection safeguards the 115 V AC motor during extended runs
- Automatic nozzle with 12 foot hose provides controlled, hands-free dispensing
Specifications
| Brand | GPI |
|---|
Questions about this item
What drum opening size does the 1 in bung adapter fit?
The included bung adapter fits a standard 1 in pump connection on the drum.
Will the 12 ft discharge hose reach my existing fuel nozzle without an extension?
The 12 ft hose and 40 in suction tube are sized for typical drum-to-tank transfers without extra hose.
How can I confirm the thermal protection is active after I start the pump?
The pump runs continuously at 12 gpm and 15 psi max pressure; if it stops unexpectedly, the thermal protection has engaged.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor 70204 Acrylic Coated Polyester Gray Hot Shot BoatGuard Boat Cover
- Transparent
BoatBuckle F12071 Kwik-Lok Gunwale Tie-Down Stainless Steel
- Transparent



