Great Plains Industries
Great Plains Industries 147000-01 Fuel Transfer Pump 12V DC 8 gpm
12 V DC electric drum pump delivers up to 8 gpm for diesel, gasoline, kerosene and E15 with 10 psi outlet pressure and 8 ft discharge hose
- 12 V DC power runs from vehicle batteries for mobile refuelling
- 8 gpm maximum flow rate fills tanks quickly
- Self-priming design starts pumping without manual priming
- 12 ft cord and 8 ft hose reach drums and vehicles easily
- Thermal protection shuts off motor at 10 psi to prevent overheating
12 V DC Fuel Transfer Pump
The Great Plains Industries 147000-01 is a 12 V DC electric drum pump rated for a maximum flow of 8 gpm. It is designed for dispensing diesel, gasoline, kerosene and E15 from drums or tanks. The unit delivers a maximum outlet pressure of 10 psi and includes a 12 ft power cord for connection to a 12 V supply. Thermal protection is built in for motor safety.
Self-Priming Design With 8 ft Discharge Hose
The pump is self-priming and ships with an 8 ft discharge hose and a manual nozzle, so fuel can be transferred immediately after the suction tube is placed in the container. A 96 in suction tube reaches the bottom of standard drums. No bung adapter is included, so the user must provide a suitable drum opening seal. The pump cannot run dry without risk of damage.
Verify Power Source And Fluid Compatibility
Before ordering, confirm that a 12 V DC power source capable of supplying 60 Hz operation is available at the point of use. Ensure the 1 in pump connection ID matches your existing plumbing or that you have the correct fittings. California Proposition 65 warns that this product contains a chemical known to cause birth defects or other reproductive harm.
Highlights
- 12 V DC power runs from vehicle batteries for mobile refuelling
- 8 gpm maximum flow rate fills tanks quickly
- Self-priming design starts pumping without manual priming
- 12 ft cord and 8 ft hose reach drums and vehicles easily
- Thermal protection shuts off motor at 10 psi to prevent overheating
Specifications
| Brand | GPI |
|---|
Questions about this item
Will the 1 in pump connection or the 8 ft hose need replacement first?
The 8 ft hose is the wear item that typically requires replacement before the 1 in pump connection.
What limit appears first during sustained use of the 1/10 HP motor?
The 10 psi maximum outlet pressure is the first limit reached under continuous operation.
How much heat or noise does the 12 V DC motor produce when running all day?
Thermal protection is built in, so the motor manages heat automatically during extended runs.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
