We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Graviton

Graviton FSP250-60ws1 250W 1U EPS server power supply

SKU CH-11EY-ZV68W

250 W 1U EPS server power supply with active PFC, 80 PLUS Gold efficiency, two SATA connectors and an 8-pin CPU connector

  • 250 W rated output powers dense server builds
  • 80 PLUS Gold efficiency reduces running costs
  • Active PFC corrects input across 90-264 V range
  • Compact 1U form factor fits 190 mm depth chassis
  • Two SATA connectors plus 8-pin CPU and 20+4-pin main power

Server EPS 1U Power Supply

The Graviton FSP250-60ws1 is a 250W 1U EPS power supply built for server and desktop platforms. It fits a standard 1U rack form factor measuring 190MM by 100MM by 40MM and delivers active PFC across a 90 to 264V input range. The unit carries 80 PLUS Gold certification for high efficiency. It is a non-modular design supplied new.

Suited For Rack Server Builds

This supply suits administrators fitting 1U rack servers or compact desktop chassis that accept an EPS 1U form factor. It provides an 8-pin CPU connector, a 20+4-pin main connector, two SATA ports and four D-type connectors. Builders needing modular cabling, higher wattage headroom or dedicated graphics power connectors should look at other models.

250W EPS 1U Output Rating

The single specification that decides fit is the 250W continuous output rating in the EPS 1U form factor. The platform must operate within this power envelope and accept the fixed cable set with an 8-pin CPU and 20+4-pin motherboard connection. Verify the chassis power budget and connector requirements before purchase.

Highlights

  • 250 W rated output powers dense server builds
  • 80 PLUS Gold efficiency reduces running costs
  • Active PFC corrects input across 90-264 V range
  • Compact 1U form factor fits 190 mm depth chassis
  • Two SATA connectors plus 8-pin CPU and 20+4-pin main power

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the FSP250-60ws1 in a 1U server rack?

Slide the 190MM*100MM*40MM unit into the 1U bay, secure the screws, connect the fixed 20+4Pin motherboard cable and the 8-pin CPU connector, then attach the four D-type bus cables and two SATA drives.

Which parts of this non-modular supply will need replacement first?

The internal cooling fan and electrolytic capacitors wear out first; expect fan noise or voltage drift after several years of continuous 250W load.

What limit appears first when the supply runs at full 250W for long periods?

Thermal protection triggers once the 1U chassis airflow cannot remove the heat from sustained 250W output, causing shutdown until the unit cools.

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.