Graviton
Graviton 19V 4.74A 90W 5.5x2.5mm PA-1900-32 AC Adapter
Supplies 19 V at 4.74 A for 90 W laptop charging via a 5.5 × 2.5 mm plug with 100–240 V input
- 90 W output powers demanding laptops reliably
- 19 V 4.74 A matches original charger specifications exactly
- 5 × 2.5 mm barrel fits the required port precisely
- 100–240 V 50–60 Hz input works worldwide with included cord
- CE certified for verified safety compliance
What this adapter replaces
The Graviton PA-1900-32 is a 90W AC adapter built to replace a lost or damaged charger for laptops that require 19V at 4.74A. It suits users who need a direct plug-in replacement without modifying the device or using a universal brick with selectable tips.
When the upgrade is worth it
Switching to this unit makes sense when the original charger fails, the barrel connector wears loose, or the cable frays near the plug. The 5.5x2.5mm tip matches the factory specification exactly, so the mechanical fit and electrical rating stay identical to the OEM supply.
Limits of the barrel interface
The 5.5x2.5mm barrel connector carries the full 90W through a single centre pin and outer sleeve, so a loose or oxidised socket on the laptop side will cause intermittent charging regardless of adapter quality. The adapter accepts 100-240V input at 50-60Hz, but it cannot compensate for a worn DC jack or a motherboard fault that draws more than 4.74A.
Highlights
- 90 W output powers demanding laptops reliably
- 19 V 4.74 A matches original charger specifications exactly
- 5 × 2.5 mm barrel fits the required port precisely
- 100–240 V 50–60 Hz input works worldwide with included cord
- CE certified for verified safety compliance
Specifications
No published specifications for this item yet.
Questions about this item
What is the barrel plug size for this 19 V 4.74 A adapter?
The adapter uses a 5.5 x 2.5 mm barrel plug; the listing notes it is not the 5.5 x 1.7 mm variant.
How do I connect the AC adapter to mains power?
Plug the supplied power cord into the adapter’s IEC inlet, then into a 100-240 V 50-60 Hz wall socket; the step often missed is seating the cord fully into the adapter before switching on.
When should I replace the power cord that comes with this unit?
Replace the cord if the plug pins are bent, the insulation is cracked, or the cord becomes warm during normal use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



