We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten new server cooling fans with copper aluminium heatsinks for HP DL360P Gen8

Graviton

Graviton 10-Pack Server Cooling Fan 696154-002 for HP DL360P Gen8

SKU CH-MCTY-R0B8Q

Ten-pack of 3 W fluid-bearing fans rated for 100,000 hours at 28 CFM and 30 dBA, designed for HP DL360 G8 server processor cooling

  • 10 fans keep a full DL360P Gen8 chassis cool
  • 28 CFM airflow moves heat away from the processor
  • 30 dBA noise level runs quietly in the rack
  • 100000 hour fluid bearing life reduces replacement cycles
  • Copper and aluminium heatsink conducts heat efficiently

Graviton 10-Pack DL360P Gen8 Fan

This ten-piece set supplies direct-replacement cooling fans for the HP DL360P Gen8 and DL360 G8 servers. Each unit integrates a copper-and-aluminium heatsink with a fluid-bearing fan rated at 3 W. The pack suits administrators refreshing a full chassis or keeping spares on hand for rapid swap-outs.

4-Pin Power and Fixed-Speed Operation

The 4-pin connector plugs into the server’s standard processor-fan header without adapters. Because the fans run at a constant speed with no RPM control, the motherboard monitors presence but cannot modulate airflow. Acoustic output stays at 30 dBA while delivering 28 CFM across the heatsink.

Fluid-Bearing Build for Long Service Life

Fluid-bearing construction targets 100,000 hours of continuous rotation, reducing wear compared with sleeve alternatives. Copper base and aluminium fins transfer heat from the processor into the airstream efficiently. Four-wire lines carry power and tachometer signals, so the system can verify fan health during every boot.

Highlights

  • 10 fans keep a full DL360P Gen8 chassis cool
  • 28 CFM airflow moves heat away from the processor
  • 30 dBA noise level runs quietly in the rack
  • 100000 hour fluid bearing life reduces replacement cycles
  • Copper and aluminium heatsink conducts heat efficiently

Specifications

No published specifications for this item yet.

Questions about this item

How often will the fluid-bearing fans in this 10-pack need replacement under continuous operation?

Each fan is rated for 100000 hours of service life, so replacement timing depends on how many hours per day the DL360P Gen8 servers run.

What thermal limit appears first when all ten fans run at full speed in a loaded chassis?

The copper-and-aluminium heatsink moves 28 CFM per fan at 3 W, so total airflow and power draw set the practical ceiling before any single component overheats.

What noise and heat output should I expect from the 10-pack running all day in a rack?

Each unit produces 30 dBA and draws 3 W; ten fans therefore add roughly 30 dBA combined noise and 30 W of heat to the rack environment.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.