We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Metallic 60 cm front panel cable with USB-C, USB-A and PCI bracket

GRAUGEAR G-AD-ETC2A-20G USB 3.2 Gen 2x2 20Gbps Type-C / USB 3.0 Front Panel Cable 60cm

SKU CH-3C5D-W4FT6 MPN G-AD-ETC2A-20G

Adds a 20 Gbps USB-C and a 5 Gbps USB-A port to your case using a 60 cm cable that connects to motherboard Type-E and 19-pin headers

  • ColorMetallic
  • Cable Length60 centimeters
  • Length60 centimeters
  • Connector Number1
  • Specifications60, centimeters, 18124, GRAUGEAR, Desktop
  • Conductormetal
  • 20 Gbps data transfer via USB 3.2 Gen 2x2 Type-C
  • 5 Gbps USB 3.0 Type-A port for legacy devices
  • 60 cm cable reaches front-panel headers with PCI bracket
  • Metal construction and double shielding resist EMI interference
  • Plug-and-play install needs no drivers and fits Type-E plus 19-pin headers

Front-panel USB 3.2 Gen 2x2 adapter

This 60 cm cable adds a USB-C port and a USB 3.0 Type-A port to a PC case by connecting to the motherboard's Type-E 20-pin and 19-pin headers. It is aimed at builders who want front-access 20 Gbps and 5 Gbps connections without opening the chassis. The kit includes a PCI bracket for secure mounting.

Thermals noise and power

The passive cable assembly draws no additional power and adds no audible noise or measurable heat inside the case. Signal integrity is maintained by fully double-shielded conductors that suppress EMI and EFI interference during high-speed transfers.

Brackets manual and warranty

A metal PCI bracket locks the ports to an expansion slot, preventing strain on the motherboard headers. The printed user manual guides the header connection, and the included warranty card covers the adapter against defects. No driver installation is required on supported operating systems.

Highlights

  • 20 Gbps data transfer via USB 3.2 Gen 2x2 Type-C
  • 5 Gbps USB 3.0 Type-A port for legacy devices
  • 60 cm cable reaches front-panel headers with PCI bracket
  • Metal construction and double shielding resist EMI interference
  • Plug-and-play install needs no drivers and fits Type-E plus 19-pin headers

Specifications

BrandGRAUGEAR
Model18124
ColorMetallic
Cable Length60 centimeters
Length60 centimeters
Connector Number1
Specifications60, centimeters, 18124, GRAUGEAR, Desktop
Conductormetal
Constructionmetal
FeaturesDesktop
Disclaimernot_applicable
Electrical Outlet Plug Typeno_plug

Questions about this item

How do I install the G-AD-ETC2A-20G and which step is often missed?

Connect the 20-pin Type-E header and the 19-pin USB 3.0 header to the motherboard, then secure the PCI bracket; the step often missed is confirming the board has both headers before starting.

What maintenance or replacement will the G-AD-ETC2A-20G need later?

The fully shielded metal construction is rated for long service life; no scheduled maintenance is required, only occasional dust removal from the panel-mounted USB-C and USB-A ports.

What limit appears first under sustained use of the G-AD-ETC2A-20G?

The cable supports up to 20Gbps on the USB-C port and 5Gbps on the USB-A port; actual throughput is limited by the host controller and connected device capabilities.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.