Grandstream
Grandstream GWN7615 802.11ac 1.75Gbps access point
Dual-band 3×3 MU-MIMO delivers 1.75 Gbps aggregate throughput with 175-metre coverage for 200-plus clients
- 75 Gbps aggregate throughput delivered through dual-band 3×3 MU-MIMO
- Two Gigabit Ethernet ports provide wired backhaul flexibility
- Auto-detecting PoE or PoE+ powers the unit without manual setup
- Supports 200-plus concurrent clients for dense environments
- Embedded controller manages up to 50 local GWN APs
Enterprise Wi-Fi access point
The Grandstream GWN7615 is an 802.11ac Wave-2 wireless access point built for medium-to-high user density environments. It delivers 1.75Gbps aggregate throughput using dual-band 3x3:3 MU-MIMO technology. The unit supports 200+ concurrent client devices and provides up to 175-meter coverage range for voice-over-Wi-Fi deployments.
Power and mounting check
Verify that your network infrastructure provides PoE or PoE+ power sourcing equipment because the access point uses self power adaptation upon auto-detection. Ensure you have available Gigabit Ethernet cabling for the two wireline ports. Confirm the mounting location suits the stated coverage range and enterprise installation requirements.
Thermals noise and power
The device operates without active cooling fans so it runs silently in normal use. Power draw scales automatically with the detected PoE or PoE+ supply class. Secure boot and digital signature lockdown protect firmware integrity without adding processing overhead that would increase heat output.
Highlights
- 75 Gbps aggregate throughput delivered through dual-band 3×3 MU-MIMO
- Two Gigabit Ethernet ports provide wired backhaul flexibility
- Auto-detecting PoE or PoE+ powers the unit without manual setup
- Supports 200-plus concurrent clients for dense environments
- Embedded controller manages up to 50 local GWN APs
Specifications
No published specifications for this item yet.
Questions about this item
Does the GWN7615 include a PoE injector or power adapter in the box?
The access point uses self power adaptation with PoE or PoE+ and does not ship with a separate injector or power adapter; you must provide a compatible PoE switch or mid-span injector.
Is the 200+ concurrent client limit on the GWN7615 sufficient for a high-density office, or do I need multiple APs?
The GWN7615 supports 200+ concurrent Wi-Fi client devices; for environments exceeding that figure, add further GWN series APs managed by the embedded controller (up to 50 local APs) or GWN.Cloud.
What real-world throughput should I expect from the advertised 1.75Gbps aggregate wireless figure?
The 1.75Gbps is aggregate dual-band throughput under ideal conditions; actual per-client speed will be lower due to overhead, interference, and the 3×3:3 MU-MIMO link budget in your specific deployment.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



