Graco
Graco XHD515 Airless Spray Tip 0.015 in
Reversible airless spray tip with a .015 in orifice, 10 to 12 in pattern and 7,250 psi rating
- ColorGray
- Fine finish with 0.015 in tip size
- Wide 10 in to 12 in spray pattern
- Handles up to 7 250 psi pressure
- Reversible design clears clogs fast
- Fits X30DH4 through X80DH4 guns
Precision Tip for Fine Finish Work
The Graco XHD515 airless spray tip delivers a 0.015 in orifice for detailed coating applications. It produces a 10 in to 12 in fan pattern suited to trim, cabinets and small surfaces. The reversible design clears blockages without removing the tip. This tip fits the 7/8 in thread standard used on compatible Graco guards.
Consistent Output at High Pressure
Rated for a maximum working pressure of 7,250 psi, the tip maintains a steady spray pattern during extended use. The hardened orifice resists wear from abrasive materials such as elastomerics and block fillers. Reversing the tip flushes debris instantly, keeping flow uniform across long jobs. Performance stays predictable from the first gallon to the last.
Verify Guard and Gun Compatibility
Confirm your spray gun accepts a 7/8 in threaded tip and that your guard matches the XHD series. The tip is engineered for use with Graco models including X30DH4, X40DH4, X45DH4, X46DH4, X50DH4, X55DH4, X60DH4, X70DH4 and X80DH4. Check the 287984 reference to ensure the correct guard-tip pairing before ordering.
Highlights
- Fine finish with 0.015 in tip size
- Wide 10 in to 12 in spray pattern
- Handles up to 7 250 psi pressure
- Reversible design clears clogs fast
- Fits X30DH4 through X80DH4 guns
Specifications
| Brand | GRACO |
|---|---|
| Color | Gray |
Questions about this item
Does the 0.015 in tip stay cool during all-day spraying at 7,250 psi?
The tip has no moving parts and no electrical load, so it generates no heat of its own; any warmth comes from the fluid temperature and pump pressure during continuous use.
Which spray gun models must I already own for this XHD515 tip to fit?
It threads onto Graco guns X30DH4, X40DH4, X45DH4, X46DH4, X50DH4, X55DH4, X60DH4, X70DH4 and X80DH4 using the standard 7/8 in thread.
Will the 10–12 in fan pattern work with my older Graco pump rated below 7,250 psi?
Yes, the reversible tip produces the same 10 to 12 in pattern at lower pressures; you simply adjust the pump output to suit the coating viscosity.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
