Graco
Graco XHD317 Airless Spray Gun Tip .017 in
Airless spray gun tip with a .017 in orifice, 6 in to 8 in pattern and 7,250 psi rating, reversible for clearing clogs and compatible with X30DH4 through X80DH4 models
- ColorGray
- Precise .017 in tip size for fine finish control
- Reversible design clears clogs without removing the tip
- 7,250 psi max working pressure handles high-pressure spraying
- 6 to 8 in pattern width covers broad surfaces quickly
- Compatible with Graco X30DH4 through X80DH4 spray guns
Graco XHD317 .017 in Airless Spray Tip
The Graco XHD317 is a new airless spray gun tip with a .017 in orifice that produces a 6 in to 8 in pattern. It threads onto the gun with a 7/8 In. connection and is rated for a maximum working pressure of 7,250 psi. The gray tip features a reversible design for clearing blockages.
Fits Graco X30DH4 through X80DH4 models
This tip suits painters using compatible Graco airless sprayers who need a .017 in tip size for medium-viscosity coatings. Buyers whose equipment uses a different thread size or who require a larger or smaller orifice for their material should look at other options.
Tip size .017 in determines flow and finish
The .017 in orifice is the single specification that controls the fluid flow rate and the resulting spray pattern width on the surface. Match this number to the coating manufacturer's recommendation and the sprayer's capacity to ensure the correct finish.
Highlights
- Precise .017 in tip size for fine finish control
- Reversible design clears clogs without removing the tip
- 7,250 psi max working pressure handles high-pressure spraying
- 6 to 8 in pattern width covers broad surfaces quickly
- Compatible with Graco X30DH4 through X80DH4 spray guns
Specifications
| Brand | GRACO |
|---|---|
| Color | Gray |
Questions about this item
What thread size does the .017 tip need to fit my spray gun?
The tip uses a 7/8 In. thread, which matches the standard Graco reversible tip guard.
How do I install the tip without the spray pattern reversing on me?
Insert the tip into the guard with the arrow pointing forward, then tighten the retaining nut by hand until snug.
When should I replace the .017 tip to keep a clean 6 in to 8 in fan?
Replace the tip when the fan narrows or develops heavy tails, typically after several hundred gallons at 7,250 psi.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
