Graco
Graco XHD211 Airless Spray Gun Tip .011 in
Airless spray gun tip with a 0.011 inch orifice and 4 to 6 inch pattern, rated to 7,250 psi and reversible for clearing clogs
- ColorGray
- Precise .011 in tip delivers fine finish
- 4–6 in pattern covers broad area quickly
- 7,250 psi rating handles high-pressure jobs
- Reversible design clears clogs without tools
- Compatible with X30DH4 through X80DH4 sprayers
Graco XHD211 Airless Spray Tip
The Graco XHD211 is a new airless spray gun tip with a .011 inch orifice designed for fine finishing work. It produces a 4 in to 6 in fan pattern at a maximum working pressure of 7,250 psi. The gray tip features a reversible design that clears clogs quickly. It threads onto compatible guns with a 7/8 in connection.
Compatible XHD Series Models
This tip fits Graco XHD spray guns including the X30DH4, X40DH4, X45DH4, X46DH4, X50DH4, X55DH4, X60DH4, X70DH4 and X80DH4. It replaces worn tips on these specific models to restore original spray performance. The upgrade is worth it when an existing tip produces uneven coverage or excessive overspray. It is not for use with non-XHD guard assemblies or competitive spray gun systems.
Capacity and Material Limits
The .011 in orifice handles low-viscosity coatings such as stains, lacquers and clear finishes with precision. It delivers a controlled 4 in to 6 in pattern suitable for trim, cabinets and detailed surfaces. At 7,250 psi maximum pressure, it manages standard professional spraying tasks. It runs out with heavier latex or elastomeric materials that require larger orifices for proper atomisation.
Highlights
- Precise .011 in tip delivers fine finish
- 4–6 in pattern covers broad area quickly
- 7,250 psi rating handles high-pressure jobs
- Reversible design clears clogs without tools
- Compatible with X30DH4 through X80DH4 sprayers
Specifications
| Brand | GRACO |
|---|---|
| Color | Gray |
Questions about this item
Will the 7/8 in. thread fit my existing airless spray gun?
The tip uses a 7/8 in. thread size, which matches Graco XHD and compatible RAC series guards; verify your guard model before ordering.
How do I install the reversible tip without leaking?
Insert the tip into the guard with the arrow pointing forward, hand-tighten the retaining nut, then snug with a wrench — over-tightening distorts the seal.
When should I replace the .011 in. orifice?
Replace the tip when the 4 in. to 6 in. pattern narrows noticeably or pressure drops below 7,250 psi during spraying.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
