Goldwood Sound, Inc.
Goldwood Sound TS30B 8-Speaker Home Audio Set
Eight passive speakers with 2.5" poly-treated woofers, 140Hz-20kHz response and 89dB sensitivity for surround or whole-house audio
- TypeOn-Wall Speakers
- Full-range audio from 2.5" poly-treated cone woofers
- 140 Hz to 20 kHz frequency response at 89 dB sensitivity
- Compact 3.5" x 3.375" x 4.25" cabinets fit tight spaces
- Mounting brackets and hardware included for quick installation
- Handles 20 to 200 watts per channel from any amp
Eight-speaker surround set
The Theater Solutions TS30B package provides eight passive bookshelf speakers for multi-room or surround-sound installations. Each cabinet houses a 2.5-inch poly-treated cone woofer covering 140Hz to 20kHz at 89dB sensitivity and 8-ohm impedance. The sealed ABS enclosures measure 3.5 by 3.375 by 4.25 inches and include spring-loaded raw-wire terminals. The set is intended for indoor use only.
Bracket mounting with raw wire
Every speaker ships with hang tabs, mounting brackets and the required hardware for wall or shelf placement. Connection is made by stripping speaker cable and inserting it into the spring-loaded terminals; no proprietary plugs are used. The cabinets are not weather-sealed, so outdoor mounting is not supported. Installers must supply CL3-rated or standard raw speaker wire and an amplifier with raw speaker outputs.
20-to-200-watt amplifier window
Each channel requires an amplifier delivering no less than 20 watts and no more than 200 watts per channel. Within that range the eight speakers can fill a typical living room or distributed-audio zone with clear midrange and treble. Systems driven below 20 watts may sound thin, while exceeding 200 watts risks damaging the 2.5-inch drivers. The package includes eight speakers, brackets, hardware and an instruction manual.
Highlights
- Full-range audio from 2.5" poly-treated cone woofers
- 140 Hz to 20 kHz frequency response at 89 dB sensitivity
- Compact 3.5" x 3.375" x 4.25" cabinets fit tight spaces
- Mounting brackets and hardware included for quick installation
- Handles 20 to 200 watts per channel from any amp
Specifications
| Brand | Theater Solutions by Goldwood |
|---|---|
| Type | On-Wall Speakers |
Questions about this item
How can I confirm the speakers are performing correctly after connecting them to my amplifier?
Verify sound plays through all eight speakers with clear output across the 140Hz-20 kHz range at 89dB sensitivity when driven by 20-200 watts per channel.
What comes in the box and which cables must I purchase separately?
The package includes eight passive speakers, mounting brackets with hardware, and an instruction manual; you must buy CL3 or raw speaker wire to connect your amplifier.
The set contains eight speakers — should I use all of them or can I start with fewer?
The TS30B is sold as an eight-speaker pack designed for surround-sound or whole-house audio; each unit is a 2.5" poly-treated cone woofer in a 3.5" x 3.375" x 4.25" sealed cabinet.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



