We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six slim white on-wall speakers with aluminum mesh grilles, 1.5 inches deep

Goldwood Sound, Inc.

Goldwood Sound SLM1W On-Wall Slim Speakers 6-Pack 1.5" Deep

SKU CH-AXFA-P7QHR

Six passive on-wall speakers measuring 1.5 inches deep with 5.25-inch woofers, 0.5-inch tweeters, 60 Hz–20 kHz response and 91 dB sensitivity

  • TypeOn-Wall Speakers
  • Slim 1.5 inch depth mounts flush like a picture
  • 2-way drivers cover 60 Hz to 20 kHz full range
  • 91 dB sensitivity works with 20 to 120 watt amps
  • Spring connectors plus recessed channel keep wiring tidy
  • Six speakers included for complete surround or whole-house audio

Compact On-Wall Speakers for Home Theater

This six-pack of passive on-wall speakers is built for buyers who want full-range surround sound without bulky floor-standing cabinets. Each unit measures only 1.5 inches deep and mounts flush like a picture frame, making the set ideal for living rooms, whole-house audio or retail installations where space is tight.

Amplifier Power Must Be 20 to 120 Watts Per Channel

The single specification that decides compatibility is the required amplifier output: your receiver or stereo must deliver no less than 20 watts and no more than 120 watts per channel into 8 ohms. If your amp falls outside that range the speakers will not perform correctly and could be damaged.

Simple Mounting With Included Hardware

Installation uses the supplied 1-inch self-tapping screws and a recessed notch on each cabinet; spring-loaded wire terminals and a recessed wire channel keep cabling flush against the wall. The only common issue is attempting to use the speakers outdoors, which the manufacturer explicitly advises against.

Highlights

  • Slim 1.5 inch depth mounts flush like a picture
  • 2-way drivers cover 60 Hz to 20 kHz full range
  • 91 dB sensitivity works with 20 to 120 watt amps
  • Spring connectors plus recessed channel keep wiring tidy
  • Six speakers included for complete surround or whole-house audio

Specifications

BrandAcoustic Audio by Goldwood
TypeOn-Wall Speakers

Questions about this item

What does the 91dB sensitivity figure mean when the speakers are driven by my receiver?

At 91dB measured at 8 ohms, the SLM1W will play loudly with modest amplifier power; a receiver delivering 20 to 120 watts per channel is sufficient for typical listening levels.

What connection standard do the spring-loaded terminals use and what gauge wire do they accept?

The terminals accept raw speaker wire or CL3-rated cable; they use simple spring-loaded connectors with no proprietary plug, so any standard two-conductor speaker wire fits.

How much wall depth and mounting hardware are needed for the 1.5-inch deep cabinets?

Each speaker is 1.5 inches deep and includes a recessed notch plus 1-inch self-tapping screws and rubber pads for flush, vibration-free mounting on standard drywall or studs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.