Goldwood Sound, Inc.
Goldwood Sound R192 frameless in-ceiling speaker 12-pack home audio speaker
A 12-piece frameless in-ceiling speaker set with 5.25″ woofers and .5″ tweeters covering 45 Hz to 22 kHz at 95 dB
- TypeIn-Ceiling Speakers
- Frameless magnetic grilles blend invisibly into ceilings
- Pressure Lock system clamps to drywall without hardware
- Twelve speakers deliver 2-way sound across 45Hz-22kHz
- 95dB sensitivity works with 10-200W amplifiers
- 25" poly woofers and .5" Mylar tweeters cover full range
Frameless 12-pack in-ceiling speakers
The Acoustic Audio R192 set delivers twelve frameless two-way speakers for whole-home audio or surround sound. Each unit uses a 5.25 inch poly cone woofer and a 0.5 inch Mylar tweeter to cover 45Hz to 22kHz at 95dB sensitivity. Magnetically attached paintable grilles create a flush frameless look on ceilings or walls. The Pressure Lock Mounting System clamps to drywall without separate hardware.
Check receiver power and wiring before ordering
Your amplifier must supply between 10 and 200 watts per channel into 8 ohms and provide raw speaker wire outputs. Use CL3 rated in-wall speaker cable for the runs from the receiver to each location. Cut round openings of 7.01 inch diameter and confirm at least 2.95 inch mounting depth behind the surface. Spring loaded terminals accept bare wire only.
Suits multi-room installs.
Builders wiring a 12 zone distributed audio system or a large home theatre will appreciate the consistent voicing and frameless aesthetics. Buyers who want self powered speakers, wireless connectivity or a smaller pair count should look at alternative designs. The passive design also requires a separate amplifier capable of driving all connected channels.
Highlights
- Frameless magnetic grilles blend invisibly into ceilings
- Pressure Lock system clamps to drywall without hardware
- Twelve speakers deliver 2-way sound across 45Hz-22kHz
- 95dB sensitivity works with 10-200W amplifiers
- 25" poly woofers and .5" Mylar tweeters cover full range
Specifications
| Brand | Acoustic Audio by Goldwood |
|---|---|
| Type | In-Ceiling Speakers |
Questions about this item
What comes in the box and what must I buy separately?
The box contains twelve frameless in-ceiling speakers with paintable magnetic grilles and spring-loaded wire terminals. You must supply a home audio receiver or amplifier with raw speaker wire outputs, plus CL3-rated in-wall speaker wire to connect them.
How do I choose between the available versions or capacities?
This product is sold only as a 12-speaker pack; there are no alternative versions or capacities to select.
What does the 95 dB sensitivity figure mean once the speakers are installed?
At 95 dB sensitivity and 8 ohms, each speaker plays loudly with modest amplifier power, so a receiver rated between 10 and 200 watts per channel will drive the full 45 Hz–22 kHz range effectively.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



