We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Seven white circular frameless in-ceiling speakers with paintable magnetic grilles

Goldwood Sound, Inc.

Goldwood Sound R192 7-piece frameless in-ceiling speaker set 5.25" 2-way

SKU CH-XCPP-M61QM

Seven frameless in-ceiling speakers with 5.25" woofers and 0.5" tweeters cover 45Hz-22kHz at 95dB and mount tool-free in 7.01" holes

  • TypeIn-Ceiling Speakers
  • Wide sound dispersion from 2-way woofer and tweeter design
  • 25" poly cone woofers with butyl rubber surrounds deliver full range coverage
  • .5" Mylar tweeters extend frequency response to 22 kHz
  • Pressure Lock Mounting System clamps to drywall with no hardware needed
  • Paintable edge-to-edge grills magnetically attach for frameless appearance

What this speaker set is and who it fits

The Goldwood Sound R192 is a frameless in-ceiling speaker set of seven units designed for a 5.25-inch 2-way home theater layout. It includes center, front, middle and rear channels for a complete surround installation. Builders and owners wanting a flush-mount look with paintable magnetic grilles will find it matches that brief. The passive design connects directly to any receiver or amplifier with raw speaker wire outputs.

The spec that decides fit

Each speaker uses a 5.25-inch high-rigidity poly cone woofer with butyl rubber surround and a 0.5-inch Mylar tweeter. Frequency response spans 45Hz to 22kHz at 95dB sensitivity and 8-ohm impedance. The Pressure Lock mounting system clamps to drywall without hardware and requires a 7.01-inch cut-out with 2.95-inch mounting depth. Your amplifier must deliver between 10 and 200 watts per channel for safe operation.

Who this suits and who should look elsewhere

This set suits installers fitting a standard seven-channel surround system into drywall ceilings where a frameless finish and tool-free mounting are priorities. It does not suit buyers who need powered speakers with built-in amplification or wireless connectivity. It also does not suit projects that require a smaller cut-out diameter, a shallower mounting depth, or an active soundbar-style solution with HDMI or streaming features.

Highlights

  • Wide sound dispersion from 2-way woofer and tweeter design
  • 25" poly cone woofers with butyl rubber surrounds deliver full range coverage
  • .5" Mylar tweeters extend frequency response to 22 kHz
  • Pressure Lock Mounting System clamps to drywall with no hardware needed
  • Paintable edge-to-edge grills magnetically attach for frameless appearance

Specifications

BrandAcoustic Audio by Goldwood
TypeIn-Ceiling Speakers

Questions about this item

What does the 95 dB sensitivity rating mean once these speakers are installed in a real ceiling?

At 95 dB sensitivity and 8 ohms, each speaker produces high volume with modest amplifier power, so a typical home theater receiver will drive the full 7-piece set to reference levels without strain.

What does the 45 Hz–22 kHz frequency response cap in practice when driven by a standard receiver?

The range covers deep bass down to 45 Hz and treble up to 22 kHz, so movie effects and music detail are reproduced fully within the limits of any receiver supplying 10–200 watts per channel.

What size cut-out and mounting depth do I need to fit these frameless speakers into my ceiling?

Cut a 7.01-inch round hole and allow 2.95 inches of clearance behind the ceiling; the Pressure Lock clamps then secure the 7.87-inch overall frame without extra hardware.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.