We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three rectangular in-wall speakers with removable white grilles and dual 5.25" woofers

Goldwood Sound, Inc.

Goldwood Sound, Inc. TSLCR5 Flush Mount In-Wall Speaker 3-Pack 5.25" Dual Woofer

SKU CH-31MY-5HAMS

Three flush-mount in-wall speakers with dual 5.25" woofers and pivoting tweeters cover 30Hz-20 kHz at 92dB sensitivity

  • TypeCenter Channel Speaker
  • Wide sound dispersion integrates with new and existing audio systems
  • Dual 5.25" woven fiber woofers deliver full-range sound coverage
  • Pivoting PEI dome tweeters direct high frequencies to the listening area
  • Pressure Lock Mounting System clamps to drywall with no hardware needed
  • 92dB sensitivity at 8 ohms works with 10-200 watt amplifiers

Three-Speaker In-Wall Set

The Theater Solutions TSLCR5 three-pack delivers a flush-mount center-channel speaker array for home-theater installations. Each unit uses a traditional passive design driven by any receiver or amplifier with raw speaker-wire outputs. The pressure-lock mounting system clamps to drywall without hardware, fitting a 16.25" x 7.5" cut-out and 3.625" mounting depth. Grilles and ABS housings can be painted to match surrounding decor.

92 dB Sensitivity 30 Hz-20 kHz Range

Dual 5.25" woven-fiber woofers with butyl rubber surrounds and shielded magnets pair with pivoting PEI dome tweeters behind a 12 dB per octave crossover. The system achieves 92 dB sensitivity at 8 ohms across a 30 Hz to 20 kHz frequency response. Recommended amplifier power is 10 to 200 watts per channel, so normal listening levels draw modest current without thermal concerns. CL3-rated wiring meets in-wall safety requirements.

Pressure Lock Mounting and Paintable Grilles

The tool-free pressure-lock mechanism secures each speaker to drywall, eliminating separate brackets or screws. A rectangular infrared knock-out plug accommodates an optional remote-control receiver. Spring-loaded raw-wire terminals accept bare conductor for quick connection. Removable grilles and durable ABS cabinets accept paint, allowing the installation to blend with any wall finish.

Highlights

  • Wide sound dispersion integrates with new and existing audio systems
  • Dual 5.25" woven fiber woofers deliver full-range sound coverage
  • Pivoting PEI dome tweeters direct high frequencies to the listening area
  • Pressure Lock Mounting System clamps to drywall with no hardware needed
  • 92dB sensitivity at 8 ohms works with 10-200 watt amplifiers

Specifications

BrandTheater Solutions by Goldwood
TypeCenter Channel Speaker

Questions about this item

How do I install the Pressure Lock Mounting System and what step do people often miss?

Cut a 16.25 by 7.5 inch rectangular hole, ensure 3.625 inch mounting depth, insert the speaker and tighten the Pressure Lock clamps until they grip the drywall firmly; the step often missed is verifying the cavity depth before cutting.

What maintenance will the woofers and tweeters need over time?

The 5.25 inch woven fiber woofers with butyl rubber surrounds and pivoting PEI dome tweeters are sealed units requiring no routine maintenance; only repaint the removable grilles if desired.

At what power level does the speaker reach its thermal or mechanical limit during sustained playback?

The 100 watt continuous and 200 watt peak ratings with 92dB sensitivity at 8 ohms define the safe operating envelope; exceeding 200 watts per channel risks thermal compression or driver damage.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.