Goldwood Sound, Inc.
Goldwood Sound, Inc. Acoustic Audio AA40CB & AA321B 3 Speaker Set
A wired three-speaker set with a centre channel and two mountable satellites for home theatre surround sound
- TypeOn-Wall Speakers
- Clear dialogue from a dedicated center channel with two 4" woofers and a 1" tweeter
- Wide front soundstage via compact left and right speakers with 2.5" polypropylene drivers
- Easy on-wall placement using included omni-directional mounting brackets and hardware
- Simple wired connection to any home audio receiver with 20–200 W per channel output
- Durable sealed ABS cabinets and spring-loaded wire terminals for reliable long-term use
Home theater three-speaker set
This set combines an AA40CB centre channel with two AA321B satellite speakers for a compact front-stage array. Passive design means every driver is powered directly by your home audio receiver, so no separate power supplies are needed. The configuration suits buyers building a basic surround system in a small to medium room. It is not for listeners who want floor-standing towers or a dedicated subwoofer channel.
Check receiver power and wiring first
Your amplifier must deliver between 20 and 200 watts per channel into an 8 ohm load to match the speakers’ ratings. You will also need CL3-rated or standard raw speaker wire to run from the receiver to each cabinet. Spring-loaded terminals accept bare wire only, so banana plugs or spades cannot be used. The cabinets are not weather-sealed, so outdoor or damp-room installation is ruled out.
Mounting brackets simplify placement
Two bracket kits with hardware are included, letting you fix each AA321B to a wall or ceiling for omni-directional aiming. The centre channel sits on a shelf or stand thanks to its horizontal 5.75-inch height and 15.625-inch width. All enclosures use black ABS sealed cabinets that keep the footprint small while protecting the drivers. No calibration microphone, remote or processing software is bundled.
Highlights
- Clear dialogue from a dedicated center channel with two 4" woofers and a 1" tweeter
- Wide front soundstage via compact left and right speakers with 2.5" polypropylene drivers
- Easy on-wall placement using included omni-directional mounting brackets and hardware
- Simple wired connection to any home audio receiver with 20–200 W per channel output
- Durable sealed ABS cabinets and spring-loaded wire terminals for reliable long-term use
Specifications
| Brand | Acoustic Audio by Goldwood |
|---|---|
| Type | On-Wall Speakers |
Questions about this item
What comes in the box and do I need to buy speaker wire separately?
The box contains three passive speakers — one AA40CB centre channel and two AA321B satellites — plus two sets of mounting brackets with hardware. You must supply your own CL3 or raw speaker wire to connect the spring-loaded terminals to a receiver.
How do the centre channel and satellite speakers differ in driver size and frequency response?
The AA40CB centre uses two 4-inch polypropylene woofers and a 1-inch soft-dome tweeter covering 94 Hz to 20 kHz at 94 dB sensitivity. Each AA321B satellite uses a single 2.5-inch polypropylene woofer covering 150 Hz to 20 kHz at 88 dB sensitivity.
What does the 94 dB sensitivity of the centre speaker mean when driven by my receiver?
At 8 ohms, 94 dB sensitivity means the centre channel produces a strong output level with modest amplifier power, so a receiver delivering 20 to 200 watts per channel will drive it to loud, clean volumes without strain.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



