We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of black 6.5-inch PA woofers with rubber surrounds and steel frames

Goldwood Sound, Inc.

Goldwood Sound GW-6024 6.5" PA Speaker Pair 170W 4ohm

SKU CH-QJSP-DC1K6

A pair of 6.5-inch PA woofers rated 170 W max, 90 W RMS, 4 Ω impedance, 89 dB sensitivity and 29–4800 Hz response

  • TypeSpeaker
  • Clear mid-range response with 29–4800 Hz coverage
  • Strong output from 89 dB sensitivity and 90 W RMS
  • Durable butyl rubber surrounds resist wear over time
  • Lightweight 1.5" aluminum voice coils improve transient speed
  • Pair of 6.5" woofers fits 5.71" cut-outs for easy upgrades

Goldwood GW-6024 PA speaker pair

The Goldwood GW-6024 is a pair of 6.5-inch woofers built for professional audio and home installations. Each driver handles 90 watts RMS and 170 watts maximum power at four ohms impedance. They suit DJs, karaoke setups, live sound rigs and fixed installations.

Sustained output with 90 watts RMS

At 90 watts RMS the woofers deliver consistent output without thermal compression during extended sets. The 1.5-inch aluminum voice coils and 20-ounce magnets with vented pole pieces dissipate heat efficiently. Frequency response spans 29 to 4800 hertz at 89 decibels SPL.

Poly mica cones and butyl rubber surrounds

Poly mica cones with butyl rubber surrounds resist fatigue and moisture in daily use. Stamped steel frames provide rigid mounting. The drivers fit a 5.71-inch enclosure hole and require 3.01 inches of mounting depth. Designed and engineered in the USA.

Highlights

  • Clear mid-range response with 29–4800 Hz coverage
  • Strong output from 89 dB sensitivity and 90 W RMS
  • Durable butyl rubber surrounds resist wear over time
  • Lightweight 1.5" aluminum voice coils improve transient speed
  • Pair of 6.5" woofers fits 5.71" cut-outs for easy upgrades

Specifications

BrandGoldwood
TypeSpeaker

Questions about this item

How much heat or noise does the 170 W max rating produce during long sessions?

These are passive woofers with no built-in amplifier, so they generate no electrical noise or heat themselves; thermal load depends entirely on the external amplifier driving them.

What amplifier or crossover must I already own to run these 4-ohm woofers?

You need an amplifier stable at 4 ohms that can deliver up to 90 W RMS per channel, plus a crossover network set around 4.8 kHz to match the 29–4800 Hz response.

Will the 6.5" drivers fit the 5.71" cut-outs in my older cabinets?

Yes, each woofer is designed for a 5.71" enclosure hole and a 3.01" mounting depth, so they drop into legacy boxes cut to those dimensions.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.