Goldwood Sound, Inc.
Goldwood Sound GW-6024 6.5" PA speaker 6-pack
Six 6.5" PA woofers rated at 90 W RMS and 170 W max with 4 Ω impedance and 89 dB sensitivity
- TypeSpeaker
- 6 speakers per pack simplify multi‑cabinet builds
- 90 W RMS per driver delivers steady output for live sound
- 29 Hz–4.8 kHz response covers deep bass to clear mids
- 89 dB sensitivity ensures efficient power use
- 4 Ω impedance matches common PA amplifiers
Six 6.5-inch PA woofers for replacement
This pack contains six Goldwood Sound GW-6024 woofers rated at 90 watts RMS and 170 watts maximum each. They present a 4-ohm nominal impedance suitable for professional PA, DJ, karaoke, live sound, fixed installation, studio monitor and home audio applications. The butyl rubber surrounds and poly mica cones are engineered for durability in high-output environments.
Frequency response spans 29 Hz to 4800 Hz at 89 dB
The usable range stops at 4.8 kHz, so a separate compression driver or tweeter is required for full-range reproduction. The 4-ohm load demands an amplifier stable at that impedance; bridging or paralleling multiple drivers will reduce the total load further. Enclosure tuning must account for the 5.71-inch cutout and 3.01-inch mounting depth to avoid port noise or driver interference.
Stamped steel frames with 20-ounce magnets
The 1.5-inch aluminum voice coils dissipate heat during extended high-power use, while the bumper plates protect the coil former at extreme excursion. Butyl rubber surrounds resist drying and cracking better than foam alternatives, maintaining compliance over time. The supplied six-pack simplifies building multi-driver columns or stereo pairs with matched sensitivity and impedance.
Highlights
- 6 speakers per pack simplify multi‑cabinet builds
- 90 W RMS per driver delivers steady output for live sound
- 29 Hz–4.8 kHz response covers deep bass to clear mids
- 89 dB sensitivity ensures efficient power use
- 4 Ω impedance matches common PA amplifiers
Specifications
| Brand | Goldwood |
|---|---|
| Type | Speaker |
Questions about this item
How many GW-6024 woofers are included and what power does each one handle?
The listing includes six GW-6024 woofers. Each unit is rated at 90 watts RMS and 170 watts maximum power handling with a 4 ohm impedance.
What does the 89 dB SPL rating mean when the speakers are installed in a cabinet?
The 89 dB SPL figure shows the sensitivity at one watt and one metre. In a real enclosure the actual output will depend on the cabinet design, amplifier power and room acoustics.
What impedance do these 6.5 inch woofers present and how does it affect amplifier choice?
Each woofer presents a 4 ohm load. Your amplifier must be stable at 4 ohms per channel; wiring multiple drivers in parallel will lower the total impedance further.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



