We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six black 8-inch PA woofers with silver cones and steel frames

Goldwood Sound, Inc.

Goldwood Sound GW-208/4 8" PA speaker 6-pack 200W 4ohm

SKU CH-WMD1-XE11P

Six 8-inch PA woofers deliver 100 W RMS each with 45–7000 Hz response and 88 dB sensitivity

  • TypeSpeaker
  • 200 W max power handles loud events
  • 100 W RMS gives clean sustained output
  • 45–7000 Hz range covers vocals and instruments
  • 88 dB sensitivity works with modest amplifiers
  • 6-driver pack suits multi-cabinet arrays

Eight-inch PA woofers in a six-pack

This set contains six Goldwood Sound GW-208/4 woofers designed for professional audio installations. Each driver handles 100 watts RMS and 200 watts maximum power at 4 ohms impedance. They suit DJ systems, live sound reinforcement, karaoke setups, fixed installations and studio monitoring. Buyers who need smaller drivers or higher frequency extension for tweeter duties should look elsewhere.

Frequency response reaches 7000 Hz at 88 dB SPL

The 45 to 7000 Hz range covers mid-bass and lower midrange duties in a multi-way cabinet. Vented pole pieces and bumper plates help dissipate heat from the 1.5 inch aluminum voice coils during extended high-output use. Stamped steel frames keep the motor structure rigid, reducing mechanical noise under load. No active cooling or amplifier specifications are included.

Poly-laminated cones with rolled foam surrounds

Each woofer uses a 20 ounce magnet assembly mounted in a stamped steel frame with an overall diameter of 8 inches. The required cutout is 7.2 inches and the mounting depth is 3.36 inches, so verify cabinet dimensions before installation. The 4 ohm nominal impedance allows parallel wiring for lower load impedance if the amplifier supports it. Grilles and crossover components are not supplied.

Highlights

  • 200 W max power handles loud events
  • 100 W RMS gives clean sustained output
  • 45–7000 Hz range covers vocals and instruments
  • 88 dB sensitivity works with modest amplifiers
  • 6-driver pack suits multi-cabinet arrays

Specifications

BrandGoldwood
TypeSpeaker

Questions about this item

How do I install these 8-inch woofers and what mounting step is often missed?

Cut a 7.2-inch hole, set the driver in the 3.36-inch mounting depth, and tighten the stamped steel frame bolts in a star pattern so the rolled foam surround seats evenly without warping.

What part will need replacement first on the GW-208/4 after heavy use?

The rolled foam surrounds tend to dry out and crack before the poly laminated cones or the 1.5-inch aluminum voice coils, so plan on a recone kit when the surround loses compliance.

At what power level does thermal compression appear first during a long set?

Sustained output above the 100-watt RMS rating heats the 20-ounce magnet and 1.5-inch voice coil enough to raise impedance and drop SPL below the rated 88 dB level.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.