We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four black 10-inch PA woofers with silver frames and rubber surrounds

Goldwood Sound, Inc.

Goldwood Sound GW-10PC-8 10" 8ohm 200W RMS 400W Max pa speaker 4 pack

SKU CH-NQ90-XVAHT

Four heavy-duty 10-inch subwoofers handle 200 W RMS each with 8 Ω impedance and 93 dB sensitivity

  • Handles 200W RMS for clean, loud output
  • 400W peak capacity absorbs sudden transients safely
  • 25–3000 Hz range covers deep bass to mid frequencies
  • 93 dB sensitivity produces high volume with modest amplifier power
  • Four drivers included, ready for multi-cabinet arrays

10-inch PA woofers in a four-pack

The Goldwood Sound GW-10PC-8 is a set of four heavy-duty 10-inch woofers built for professional and home audio systems. Each driver handles 200 watts RMS and 400 watts maximum power at 8 ohms impedance. The pack suits installers or enthusiasts replacing multiple drivers in PA cabinets, karaoke rigs, DJ monitors, fixed installations or studio setups. All units are new and engineered in the USA.

Replaces blown or tired 10-inch drivers

These woofers serve as direct replacements for 10-inch speakers that have failed or lost output over time. The 25 to 3000 Hz frequency response and 93 dB SPL suit mid-bass duties in two- or three-way enclosures. A 1.5-inch four-layer aluminum voice coil and 40-ounce magnet with bumper plates provide the motor strength needed for high-output applications. The jump is worth it when the original drivers cannot match the 200-watt RMS rating or when the cone and surround have deteriorated.

Suits builders refreshing multi-driver cabinets

The four-pack matches the needs of technicians servicing PA cabinets, stage monitors or installed sound systems that use several identical 10-inch woofers. Poly-mica cones with rubber surrounds and vented pole pieces hold up under continuous professional use. Die-cast aluminum frames keep the structure rigid. Buyers needing a single driver, a different impedance, a smaller cut-out than 9.17 inches or a shallower mounting depth than 4.49 inches should look at other models.

Highlights

  • Handles 200W RMS for clean, loud output
  • 400W peak capacity absorbs sudden transients safely
  • 25–3000 Hz range covers deep bass to mid frequencies
  • 93 dB sensitivity produces high volume with modest amplifier power
  • Four drivers included, ready for multi-cabinet arrays

Specifications

BrandGoldwood

Questions about this item

What enclosure hole size fits the 10.2" GW-10PC-8 woofer?

The speaker requires a 9.17" cut-out diameter in the cabinet.

How do I wire the 8 ohm voice coil and where is the polarity marked?

Connect amplifier leads to the push terminals on the frame; the red dot or plus sign indicates positive.

When should the rubber surround on the 1.5" voice-coil driver be inspected or replaced?

Check the surround annually for cracks or hardening; replace it if the cone moves unevenly or distortion appears.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.