We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black 3.5-inch tweeters with paper cones and steel frames

Goldwood Sound, Inc.

Goldwood Sound GT-25 3.5" Kapton Tweeter Pair 80W 8ohm

SKU CH-FPB4-CQPGX

A pair of 3.5" Kapton tweeters rated 40 W RMS, 80 W peak, 8 Ω, 96 dB sensitivity, 1.5–21 kHz response, 1.04" mounting depth

  • TypeSpeaker
  • Clear highs from 1.5 kHz to 21 kHz
  • 40 W RMS each for steady output
  • 96 dB sensitivity needs less amp power
  • 8 Ω impedance suits common PA crossovers
  • 04" mounting depth fits shallow enclosures

Tweeter Pair for PA & Studio Use

This pair of Goldwood Sound GT-25 tweeters is built for pro-audio cabinets, DJ systems, karaoke rigs, live-sound enclosures, fixed installations, studio monitors and home-audio speakers. Each unit handles 40 watts RMS and 80 watts maximum so a stereo pair delivers consistent high-frequency output across demanding sets. The 8-ohm impedance matches standard crossover networks without extra wiring complexity.

1500–21000 Hz Response with 96 dB SPL

The Kapton voice coil and 3 oz magnet drive a 3.5-inch paper cone to cover 1500 Hz through 21,000 Hz at 96 dB sensitivity. That range reproduces cymbals, vocals and synth harmonics cleanly at stage volumes, while the 40-watt continuous rating provides headroom for dynamic peaks. Above 21 kHz response rolls off, so systems needing extended ultrasonic detail will require a different driver.

Drop-In Replacement for 3.11-Inch Cutouts

Each tweeter measures 4.02 inches overall, fits a 3.11-inch enclosure hole and needs 1.04 inches of mounting depth behind the baffle. The stamped-steel frame bolts directly into existing PA cabinets or monitor boxes, freeing internal volume for mid-bass drivers. Builders without a 3.11-inch cutout or 1.04-inch clearance must modify the enclosure or choose another model.

Highlights

  • Clear highs from 1.5 kHz to 21 kHz
  • 40 W RMS each for steady output
  • 96 dB sensitivity needs less amp power
  • 8 Ω impedance suits common PA crossovers
  • 04" mounting depth fits shallow enclosures

Specifications

BrandGoldwood
TypeSpeaker

Questions about this item

Will the 3.5" GT-25 tweeters fit the 3.11" cut-outs in my existing PA cabinets?

Yes — each tweeter is built for a 3.11" enclosure hole, with a 4.02" overall diameter and 1.04" mounting depth, so they drop straight into that cut-out size.

How can I verify the pair is performing correctly once installed?

Play pink noise through the system; each unit should deliver a smooth 1500–21000 Hz response at 96 dB SPL with no audible distortion at 40 W RMS.

What hardware is included with the pair and what must I source separately?

The box contains two GT-25 tweeters with black paper cones, .5625" Kapton voice coils and stamped steel frames; crossover components, mounting screws and wiring are not supplied.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.