We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of black 5.25 inch midrange drivers with paper cones and stamped steel frames

Goldwood Sound, Inc.

Goldwood Sound GM-35 5.25" Midrange Pair 80W 8ohm

SKU CH-XAAH-H0AZN

A pair of 5.25-inch midrange drivers handling 40 watts RMS each with 97 dB sensitivity and 600–15,000 Hz response

  • TypeSpeaker
  • Clear midrange projection for vocals and instruments
  • 40 watts RMS power handles demanding PA mixes
  • 97 dB SPL delivers loud output with modest amp power
  • 25 inch cone fits standard 4.09 inch cut-outs
  • Kapton voice coil and 3 oz magnet ensure reliable thermal performance

GM-35 Midrange Pair for PA and Fixed Install

The Goldwood Sound GM-35 is a pair of 5.25 inch midrange drivers rated at 40 watts RMS and 80 watts maximum each. They present an 8 ohm impedance and cover a frequency response of 600 to 15,000 Hz. The set is aimed at installers and system builders who need direct replacements for pro DJ, PA, karaoke, live sound, studio monitor or home audio enclosures.

Sustained Output with Kapton Voice Coils

Each driver uses a .75 inch Kapton voice coil on a 3 oz magnet structure, a combination built to dissipate heat during extended playing sessions. The 97 dB sensitivity means the cones produce high sound pressure levels without demanding excessive amplifier power. Black paper cones with treated surrounds maintain consistent excursion and tonal balance when the system runs at continuous rated levels rather than brief peaks.

Stamped Steel Frames and Standard Cut-Out

The stamped steel frames provide rigid mounting while keeping the overall diameter to 5.12 inches per unit. Each driver fits a 4.09 inch enclosure hole and requires 1.69 inches of mounting depth, dimensions that match many legacy midrange cut-outs. The pair ships as a matched set, simplifying stereo or distributed installs where identical drivers are required for coherent imaging.

Highlights

  • Clear midrange projection for vocals and instruments
  • 40 watts RMS power handles demanding PA mixes
  • 97 dB SPL delivers loud output with modest amp power
  • 25 inch cone fits standard 4.09 inch cut-outs
  • Kapton voice coil and 3 oz magnet ensure reliable thermal performance

Specifications

BrandGoldwood
TypeSpeaker

Questions about this item

How much heat or noise does each 5.25" midrange generate when driven at 40 watts RMS all day?

The drivers are passive with 97 dB SPL sensitivity and 8 ohm impedance, so they produce no fan noise and negligible heat at 40 watts RMS; thermal load depends on the external amplifier.

What amplifier power and crossover components are required to run the pair at 80 watts max each?

Each midrange handles 40 watts RMS and 80 watts max at 8 ohms, so an amplifier delivering up to 80 watts per channel into 8 ohms plus a crossover network set between 600 Hz and 15,000 Hz is needed.

Will the 5.12" overall diameter and 1.69" mounting depth fit the cut-outs and cabinet space of my older PA enclosures?

Each driver needs a 4.09" cut-out and 1.69" depth behind the baffle; the 5.12" frame covers standard 5.25" openings, so measure your existing cabinets against those figures before installing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.