We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black carpeted rectangular MDF box with front port and single 10 inch speaker cutout

Goldwood Sound, Inc.

Goldwood Sound E-10SP 10" Ported Car Speaker Enclosure

SKU CH-SSQ7-SKKTB

Ported 10-inch enclosure tuned to 36 Hz adds 2-3 dB output and reduces harmonic distortion for car, truck or SUV audio systems

  • Speaker Size10"
  • Ready to install — arrives fully assembled
  • Fits 10-inch woofers — 9.125" cut-out and 12.75" mounting depth
  • Ported design tuned to 36 Hz — adds up to 2-3 dB output
  • Front port cuts 5th-order harmonic distortion
  • CARB-compliant MDF with aviation-grade carpet — 0.75" thick baffle

Ready-to-install 10-inch enclosure

The Goldwood Sound E-10SP is a fully assembled, ported cabinet designed to house a single 10-inch woofer in cars, trucks or SUVs. It ships with a 0.75-inch thick baffle cut for a 9.125-inch mounting hole and 12.75-inch depth. The MDF construction meets CARB compliance and is wrapped in black aviation-grade carpet.

Builders adding bass without custom fabrication

This enclosure suits installers who want a tuned, vented box that arrives finished and only requires speaker-wire connections. It is not intended for buyers needing a multi-subwoofer layout, a sealed alignment or a box that fits a non-standard cut-out dimension.

Port tuning and carpet finish

The front-firing port is tuned to 36 Hz and can raise output by 2-3 dB while reducing fifth-order harmonic distortion. The enclosure volume is 1.07 cubic feet, and spring-loaded terminals on each side accept raw wire for quick hookup.

Highlights

  • Ready to install — arrives fully assembled
  • Fits 10-inch woofers — 9.125" cut-out and 12.75" mounting depth
  • Ported design tuned to 36 Hz — adds up to 2-3 dB output
  • Front port cuts 5th-order harmonic distortion
  • CARB-compliant MDF with aviation-grade carpet — 0.75" thick baffle

Specifications

BrandGoldwood
Speaker Size10"

Questions about this item

What amplifier and woofer do I need to use this 10" ported enclosure?

You need a complete wired car audio system ready for a passive enclosure and a 10" woofer that fits a 9.125" cut-out with up to 12.75" mounting depth.

Will my existing raw speaker wire work with the spring loaded terminals?

Yes, the enclosure uses spring loaded positive and negative raw wire input connections per side that accept standard speaker wire.

How can I verify the box is tuned to 36 Hz after installation?

The enclosure is factory tuned to 36 Hz; you can confirm it by measuring the port output peak with a test tone and SPL meter at that frequency.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.