Goldwood Sound, Inc.
Goldwood Sound AA35CB/AA351B 3 Speaker Home Audio Set
A compact three-speaker home theater set with a centre channel and two mountable satellites, driven by any receiver delivering 20 to 200 watts per channel
- TypeOn-Wall Speakers
- Center channel delivers clear dialogue with 92dB sensitivity
- Front speakers provide wide soundstage at 89dB sensitivity
- Compact center fits tight spaces measuring 4.125" x 9.625" x 3.875
- Wall-mountable front speakers include U-brackets for easy placement
- Passive design works with any 20–200W receiver via raw wire outputs
Compact 3-speaker set for home theatre
The Acoustic Audio AA35CB and AA351B form a wired three-piece system with a dedicated centre channel plus left and right speakers. Designed for on-wall mounting, the set uses traditional passive drivers that draw power from your existing home audio receiver. Black ABS sealed cabinets keep the footprint small while delivering full-range coverage for movies and music.
Mounting hardware and wiring simplify setup
Each AA351B satellite ships with a "U" bracket and fasteners so you can attach it directly to the wall. The centre channel sits on a shelf or can be bracketed separately. All three units use spring-loaded raw-wire terminals, so you only need CL3 or standard speaker cable between the amp and the speakers. No proprietary connectors or powered subwoofer are included.
Installation suits DIY builders with basic tools
Mount the brackets, run the wire, and tighten the spring clips — no soldering or specialised crimping required. The speakers are rated for 20 to 200 watts per channel at 8 ohms, so match your amplifier output to that window. Not rated for outdoor use, and the set lacks a dedicated subwoofer, so buyers wanting deeper bass will need a separate low-frequency module.
Highlights
- Center channel delivers clear dialogue with 92dB sensitivity
- Front speakers provide wide soundstage at 89dB sensitivity
- Compact center fits tight spaces measuring 4.125" x 9.625" x 3.875
- Wall-mountable front speakers include U-brackets for easy placement
- Passive design works with any 20–200W receiver via raw wire outputs
Specifications
| Brand | Acoustic Audio by Goldwood |
|---|---|
| Type | On-Wall Speakers |
Questions about this item
Will the spring-loaded wire terminals on the AA35CB and AA351B need replacement over time?
The terminals are built into the sealed ABS cabinets and accept raw speaker wire; no user-serviceable parts are listed, so they are not expected to require routine replacement.
What limits continuous output first — the 20–200 W per channel amplifier range or the 89–92 dB sensitivity?
The 89 dB sensitivity of the AA351B and 92 dB of the AA35CB mean the amplifier will reach its 200 W ceiling before the drivers hit thermal compression.
How much heat do the sealed ABS cabinets produce when the system runs all day at reference level?
Passive speakers convert most amplifier power into sound, not heat; the sealed ABS enclosures remain close to room temperature during extended use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



