We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular aluminium chassis with dual front and rear fans, integrated power supply, Ethernet port, 188x130x352mm, 4400g

Goldshell

Goldshell Antminer L3++ 580MH/s 942W Scrypt Miner With PSU

SKU CH-H50Z-F2PEN

Scrypt ASIC miner delivers 580 MH/s at 942 W with 288 BM1485 chips and dual fans in a 188 × 130 × 352 mm aluminium chassis

  • 580 MH/s hash rate from 288 BM1485 chips
  • 942 W power draw at 11.60–13.00 V
  • 76 dB noise with dual-fan cooling
  • Mines any Scrypt-based cryptocurrency
  • Compact 188 × 130 × 352 mm aluminium chassis

Purpose-built Scrypt ASIC miner

This Goldshell Antminer L3++ is an application-specific integrated circuit designed solely for the Scrypt hashing algorithm. It targets miners who want a dedicated machine for Litecoin and other Scrypt-based coins such as Dogecoin. The unit arrives new and includes a 220 V power supply so it can be plugged in and configured without sourcing a separate PSU.

Thermals, noise and power

Two double-ended fans push air across four hash boards that hold 288 BM1485 chips, each with its own bonded aluminium heat sink. The aluminium-alloy chassis measures 188 x 130 x 352 mm and weighs 4400 g. In normal operation the miner draws 942 W at 11.60–13.00 V, runs at 76 dB and is rated for ambient temperatures of 0–40 °C with humidity up to 95 %.

Deciding specification

The hashrate is 580 MH/s, which determines daily coin output and whether the electricity cost fits your mining plan. Nine 6-pin PCIe cables feed the boards and a single Ethernet port connects the controller to the pool. Buyers who need a different algorithm, a higher hashrate or lower power draw should look elsewhere.

Highlights

  • 580 MH/s hash rate from 288 BM1485 chips
  • 942 W power draw at 11.60–13.00 V
  • 76 dB noise with dual-fan cooling
  • Mines any Scrypt-based cryptocurrency
  • Compact 188 × 130 × 352 mm aluminium chassis

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the Antminer L3++ and what is the step people often get wrong?

Connect the nine 6-pin power cables to the 220 V PSU, link the Ethernet port to your router, then power on. The step often missed is ensuring all nine connectors are fully seated before applying power.

What maintenance will the Antminer L3++ need later?

Clean the dual fans and the 288 BM1485 chip heat sinks regularly to prevent dust build-up. Replace fans if noise rises above the rated 76 dB or airflow drops.

What limit appears first during sustained use of the Antminer L3++?

The 0–40 °C operating temperature range is the first limit. If intake air exceeds 40 °C or humidity leaves the 5–95 % band, the miner will throttle or shut down.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.