GoHz SC200-0012V2410 12V to 24V 5A 120W IP68 Power Adapter
Converts 9–23 V DC input to 24 V at 5 A with 120 W output and IP68-rated aluminium housing for vehicle or marine use
- Type5A 120W
- ColorGray
- Converts 12V to 24V at up to 120W for demanding loads
- 94% conversion efficiency reduces heat and wasted energy
- IP68-rated aluminium shell withstands water, dust, shock and humidity
- Operates reliably from -40°C to +80°C in harsh environments
- Multiple protections guard against over-current, over-voltage and over-temperature faults
12V to 24V 120W IP68 Boost Converter
The GoHz SC200-0012V2410 is a DC step-up converter that raises a 9-23V input to a regulated 24V output at up to 5A. It delivers 120W of continuous power with 94% typical efficiency. The aluminium housing is fully potted to meet IP68, making it suitable for vehicle, marine and outdoor installations where moisture, dust or vibration are present.
For 12V systems needing 24V loads
This unit suits trucks, boats, solar setups and DIY projects that run 24V equipment from a 12V battery. It includes over-current, over-temperature and over-voltage protection for reliable operation. Builders who need more than 5A output, a different output voltage, or an input range above 23V should select a higher-current or alternative model instead.
120W maximum output power
The converter is rated for 120W at 24V and 5A. Exceeding this power level will trigger protection or cause shutdown. Verify that the combined load of all connected devices stays at or below this figure before installation.
Highlights
- Converts 12V to 24V at up to 120W for demanding loads
- 94% conversion efficiency reduces heat and wasted energy
- IP68-rated aluminium shell withstands water, dust, shock and humidity
- Operates reliably from -40°C to +80°C in harsh environments
- Multiple protections guard against over-current, over-voltage and over-temperature faults
Specifications
| Brand | GoHz |
|---|---|
| Model | SC200-0012V2410 |
| Type | 5A 120W |
| Color | Gray |
Questions about this item
What input voltage range does the 12V-to-24V boost converter accept?
The unit operates from a 9 V to 23 V DC source, so a nominal 12 V vehicle or battery system is well within range.
What cable gauge and length are supplied for the input and output connections?
All four leads — input positive red, input negative black, output positive yellow, output negative black — are 16 AWG and 14.5 cm long.
How should the converter be mounted to keep its IP68 rating intact?
Secure the aluminium housing with the built-in flanges; do not drill the sealed silicone potting or the waterproof guarantee is void.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



