We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver steel roller stand with three rectangular legs, wheels, and a vertical centre column

Godox Photo Equipment Co. Ltd

Godox SA5015 Heavy-Duty Roller Stand, Small, Silver

SKU CH-49R8-2WFZ5

A small silver roller stand with wheels adjusts from 92 cm to 168 cm, supports up to 40 kg, and has an adjustable leg for uneven surfaces

  • Supports up to 40 kg of lighting gear
  • Adjustable height from 92 cm to 168 cm
  • Adjustable leg locks securely on uneven surfaces
  • Junior receiver and 5/8" pin allow vertical or horizontal mounting
  • Smooth-rolling wheels and folding base for easy transport

Heavy-Duty Studio Roller Stand

The Godox SA5015 is a steel roller stand built for photographers, videographers, and audio professionals who need a stable, mobile platform for heavy lighting gear in studio or on-location environments. It supports loads up to 40kg, handling strobes, monolights, and large modifiers with confidence.

Adjustable Height and Leg Stability

Height adjusts from 92cm to 168cm to suit varied shooting scenarios. An adjustable leg extends independently to level the stand on uneven floors, stairs, or tight spaces, keeping equipment secure during use.

Versatile Mounting and Transport

A 1-1/8" Junior receiver and a retractable 5/8" pin that swings 90 degrees allow vertical or horizontal gear mounting. The folding base and smooth-rolling wheels make the stand easy to move, reposition, and store between setups.

Highlights

  • Supports up to 40 kg of lighting gear
  • Adjustable height from 92 cm to 168 cm
  • Adjustable leg locks securely on uneven surfaces
  • Junior receiver and 5/8" pin allow vertical or horizontal mounting
  • Smooth-rolling wheels and folding base for easy transport

Specifications

No published specifications for this item yet.

Questions about this item

How do I level the Godox SA5015 on stairs or uneven ground, and what step is often missed?

Extend the adjustable leg until the stand sits level, then tighten its locking knob fully; the step people skip is re-checking level after mounting the load.

Which parts of the SA5015 roller stand will need inspection or replacement after heavy studio use?

Check the wheel bearings and brake locks for smooth rolling, verify the leg-lock collars hold at 92 to 168 cm, and confirm the 1-1/8" junior receiver and 5/8" pin remain tight.

At what load does the SA5015 stand reach its rated limit during a long shoot?

The stand is rated for 40 kg, which equals 80 to 89 lbs; sustained loads at or above that figure will stress the steel column and leg locks first.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.