Godox Photo Equipment Co. Ltd
Godox Photo Equipment Co. Ltd UMic10 USB Cardioid Condenser Microphone
A cardioid condenser USB microphone with real-time headphone monitoring and plug-and-play compatibility for podcasts, streaming and voiceovers
- Crystal-clear vocals from large cardioid condenser
- Plug-and-play USB on Windows 7/8/10 and Mac OS
- Real-time monitoring via 3.5 mm headphone jack
- Adjustable gain and volume controls on the mic
- Shock mount cuts vibration for stable recordings
Purpose & Audience
The Godox UMic10 is a USB cardioid condenser microphone built for creators who record vocals, instruments, podcasts or voice-overs. Its large-diaphragm capsule rejects side and rear noise so home studios, bedrooms or kitchens still yield studio-grade clarity without acoustic treatment.
Build Integration
Plug-and-play USB connectivity works with Windows 7, 8, 10 and Mac OS, requiring no driver installation or external interface. A 3.5 mm headphone jack provides real-time monitoring at 20 Hz – 20 kHz with 10 mW into 32 Ohm, freeing the computer’s own audio output for other tasks.
Sustained Operation
The integrated shock mount suppresses vibration and handling rumble during long sessions, keeping the noise floor low take after take. Direct volume control on the microphone lets you adjust levels instantly while recording, preventing overloads that would otherwise require post-production fixes.
Highlights
- Crystal-clear vocals from large cardioid condenser
- Plug-and-play USB on Windows 7/8/10 and Mac OS
- Real-time monitoring via 3.5 mm headphone jack
- Adjustable gain and volume controls on the mic
- Shock mount cuts vibration for stable recordings
Specifications
No published specifications for this item yet.
Questions about this item
What limits the microphone's performance during long recording sessions?
The cardioid condenser capsule isolates side and rear noise, so room acoustics and placement become the practical limit for sustained quality.
How much heat or noise does the UMic10 generate when used all day?
It draws power from USB with no fan or active cooling, so it produces no audible noise and negligible heat during continuous operation.
What headphones are needed to use the real-time monitoring jack?
Any headphones with a 3.5 mm plug work; the output delivers 10 mW into 32 Ohm loads across 20 Hz–20 kHz.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



