We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular LED panel on a metal yoke with a stand mount, matte silver finish, daylight balanced, built-in filter slot and LCD display

Godox Photo Equipment Co. Ltd

Godox LED1000D II 5600K 70W studio video light

SKU CH-W0VF-0GTW4

Daylight-balanced 70W LED panel with 0-100% dimming, DMX control, 96 CRI, 98 TLCI, 5400 lux at 3.3 ft, 17x18 inch size, 5.53 lbs, AC or V-mount battery power

  • TypeAccessories
  • Precise dimming 0‑100% via built‑in controls or DMX
  • True‑to‑life colour with CRI 96 and TLCI 98
  • Compact 17"×18" panel weighing 5.53 lbs for easy transport
  • Efficient 70W draw delivering 5400 lux at 3.3'
  • Daylight‑balanced 5600K output with ±300K consistency

Daylight LED video panel

The Godox LED1000D II is a 5600K daylight-balanced LED light designed for video and photo work where accurate colour is essential. It draws 70W and delivers up to 5400 lux at 3.3 feet, making it suitable for studio interviews, product shoots and on-location recording. The panel measures 17 by 18 inches and weighs 5.53 lbs, so it fits small studios and travels easily. Creators who need bi-colour temperature adjustment or battery-only operation without a separate V-mount pack will need a different fixture.

Silent convection cooling and low power

The unit runs on 70W maximum draw and uses passive convection cooling, so there is no fan noise to interfere with audio capture. Colour accuracy stays consistent across the 0-100% dimming range thanks to a CRI of 96 and TLCI of 98, reducing the need for colour correction in post. The 5600K output holds within a 300K variance, keeping skin tones stable as intensity changes. Shoots that demand high-output HMI-level punch or active cooling for extreme ambient heat are beyond this panel's design.

Yoke mount, filter slot and dual power options

A supplied yoke with a standard light-stand receiver and locking knob secures the panel for overhead or angled positioning. A built-in filter slot accepts diffusion or colour gels for quick light shaping without extra frames. Mains power is provided by the included AC adapter, while optional 14.8V V-mount batteries enable cordless location work. The DMX port and 65.6-foot wireless remote allow networked control, but the remote itself requires two AAA batteries that are not supplied.

Highlights

  • Precise dimming 0‑100% via built‑in controls or DMX
  • True‑to‑life colour with CRI 96 and TLCI 98
  • Compact 17"×18" panel weighing 5.53 lbs for easy transport
  • Efficient 70W draw delivering 5400 lux at 3.3'
  • Daylight‑balanced 5600K output with ±300K consistency

Specifications

TypeAccessories

Questions about this item

How do I mount the LED1000D II on a light stand and what step is often missed?

Slide the yoke's receiver onto the stand spigot and tighten the locking knob fully; the step people skip is securing that knob, which lets the panel tilt under its own weight.

Which consumables will I need to replace during the life of the LED1000D II?

The wireless remote takes two 3 V AAA batteries that are not included; the main unit has no user-replaceable parts.

At what distance does the 5600 K output drop below 5400 lux when run continuously at full power?

The 5400 lux rating is measured at 3.3 ft; beyond that distance illuminance falls off with the inverse-square law.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.