Peerless Industrial Group
Peerless Industrial Group Tire Chains Single Bus & RV V-Bar PK2 QG2821
$67.99
0.00081704BTC
In stock
GODIAG
GODIAG Full VAG Test Platform GT112 GT111 GT110 Pogo Pin electrical system tool
Complete VAG IMMO test kit covering 2nd, 3rd, 3.5th and 4th generation dashboards with pogo-pin data access
- FeaturesGODIAG GT112 K-Line FOR VW Audi Skoda Seat 2nd & 3rd Generat
- TypeCode Scanners & Accessories
- Tests 2nd & 3rd gen VAG dashboards via K-Line with GT112
- Supports CAN-Bus 3rd & 3.5th gen IMMO matching with GT111
- Reads & writes 4th gen UDS IMMO data via POGO PIN on GT110
- Works with VCDS, VAS, Autel, Key Tool Plus and similar tools
- Covers VW, Audi, Skoda, Seat across multiple platform generations
Full VAG Test Platform
The GODIAG Full VAG Test Platform bundles the GT112, GT111 and GT110 cables into one kit for VW, Audi, Skoda and Seat vehicles. It covers 2nd and 3rd generation K-Line dashboards, 3rd and 3.5th generation CAN-Bus dashboards and 4th generation CAN-Bus UDS IMMO systems. Professional locksmiths and automotive technicians use it for offline key matching, IMMO synchronisation, mileage correction and emergency start detection.
Practical interface limits
The GT112 handles K-Line communication for older dashboards while the GT111 and GT110 address CAN-Bus and CAN-Bus UDS protocols respectively. Each cable targets a specific dashboard generation so the kit cannot work on vehicles outside those listed generations. Compatibility depends on the diagnostic tool used; supported devices include HEX V2, VAGCOM VCDS 5053, VAS5054A, VAS6154 and several key programmers.
Installation and common issues
Connections are made through the vehicle’s diagnostic port and the supplied Pogo Pin adapters contact the dashboard PCB directly for data reading and writing. Correct pin alignment is critical; misaligned pins cause read or write failures on the GT111 and GT110. Users must select the matching cable for the dashboard generation and ensure the external programmer supplies the required voltage.
Highlights
- Tests 2nd & 3rd gen VAG dashboards via K-Line with GT112
- Supports CAN-Bus 3rd & 3.5th gen IMMO matching with GT111
- Reads & writes 4th gen UDS IMMO data via POGO PIN on GT110
- Works with VCDS, VAS, Autel, Key Tool Plus and similar tools
- Covers VW, Audi, Skoda, Seat across multiple platform generations
Specifications
| Brand | GODIAG |
|---|---|
| Features | GODIAG GT112 K-Line FOR VW Audi Skoda Seat 2nd & 3rd Generation Dashboard IMMO Key Matching Test Platform Cable GODIAG GT111 FOR VW Audi Skoda Seat CAN-Bus 3rd & 3.5th Generation Dashboard IMMO Key Matching Test Platform Cable with POGO PIN to Read & Write Data GODIAG GT110 FOR VW Audi Skoda Seat CAN-Bus UDS 4th Generation IMMO System Test Platform Cable with POGO PIN to Read & Write POGO PIN Data |
| Type | Code Scanners & Accessories |
Questions about this item
Which platform cable covers my VW generation — GT112, GT111 or GT110?
GT112 handles K-Line 2nd and 3rd generation dashboards, GT111 adds POGO PIN for CAN-Bus 3rd and 3.5th generation, and GT110 covers CAN-Bus UDS 4th generation with POGO PIN.
What does the POGO PIN on GT111 and GT110 actually let me do on the bench?
It enables offline reading and writing of IMMO data directly from the instrument cluster without soldering or removing the chip.
Which diagnostic interfaces can I plug these three cables into?
They connect to HEX V2, VAGCOM VCDS 5053, VAS5054A, VAS6154, SUPER VAG K+CAN, Obdstar, Lonsdor, AVDI, ZEDFULL, VVDI2, Key Tool Plus and X300 DP Plus.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
