We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact metal network switch, five RJ45 ports, fanless desktop or wall mount design

Goalake 5-Port PoE Switch 4 PoE + 1 Uplink 52W

SKU CH-3MRX-3G6RF

A 5-port PoE switch with four powered ports and one uplink, delivering up to 30 W per port and 52 W total

  • FormatDesktop
  • StandardsPassive PoE
  • Network MediaPoE
  • Network Management TypeUnmanaged
  • Uplink Ports8
  • Uplink InterfaceRJ45
  • Delivers up to 30W per PoE port for IP cameras and access points
  • Total 52W PoE budget powers four devices simultaneously without extra adapters
  • Extend function reaches 250 metres over a single Ethernet cable
  • Fanless metal chassis runs silently in desktop or wall-mount setups
  • Easy smart management via app or web interface enables VLAN, QoS and AI watchdog control

Five-port PoE switch with uplink

This five-port switch supplies four PoE ports and one dedicated uplink for small surveillance or wireless deployments. It delivers up to 30 W per port and 52 W total power budget for IP cameras and access points. Plug-and-play operation and a fanless metal chassis suit desktop or wall mounting.

Practical limits of the PoE standard

IEEE 802.3af/at compliance means power negotiates only with active PoE devices; passive or non-PoE equipment receives data but no power. The switch forwards packets at 100 Mbps with a 768 KB buffer and supports 9216-byte jumbo frames. Ports operate at 10/100/1000 Mbps on the uplink and two PoE ports, while the remaining two PoE ports run at 10/100 Mbps.

52 W total PoE budget decides suitability

The 52 W aggregate ceiling determines how many cameras or access points can run simultaneously without an external injector. Four ports at 30 W each would exceed the budget, so high-draw devices must be balanced across ports. AI watchdog and PD detection help maintain reliable power delivery within this limit.

Highlights

  • Delivers up to 30W per PoE port for IP cameras and access points
  • Total 52W PoE budget powers four devices simultaneously without extra adapters
  • Extend function reaches 250 metres over a single Ethernet cable
  • Fanless metal chassis runs silently in desktop or wall-mount setups
  • Easy smart management via app or web interface enables VLAN, QoS and AI watchdog control

Specifications

BrandNETGEAR
SeriesProSafe
Part NumberPS104G
FormatDesktop
StandardsPassive PoE
Network MediaPoE
Network Management TypeUnmanaged
Uplink Ports8
Uplink InterfaceRJ45
Uplink Speed10/100 Mbps
Uplink Speed/TypePoE
Primary Port Count5
Primary Ports16 x SFP + 8 x RJ45
Primary Port Speed10/100Mbps + 1000Mbps
Primary Port TypePoE
Management InterfacePoE
Management Feature5 Port PoE Switch, 1 Power Cord, User Manual
Jumbo Frames9216 bytes
Packet Forwarding Rate100 megabits_per_second
Buffer Memory768KB
IPv4 FeaturesNO SFP
Securitytrue
PoENo
SNMPNo
Layer1
Layer 2 FeaturesPoE, 100 megabits_per_second, 5
Layer 3 Features5 Port / 52W 4x PoE+
Module SupportNo
CablingPoE
PoE Power BudgetNO SFP
PowerAC 120/230 V ( 50/60 Hz )
Max Power Consumption44 volts_of_direct_current
Dimensions14.33in W x 12.83in H x 9.06in D
Weight0.4 kilograms
Certificationtrue, not_applicable
Max Heat Dissipation52
Features5, PoE, 5 Port PoE Switch, 1 Power Cord, User Manual, 100 megabits_per_second, Metal, black
Package Contents5 Port PoE Switch, 1 Power Cord, User Manual

Questions about this item

Should I pick the 2×1 Gbps PoE ports or the 2×100 Mbps PoE ports for my IP cameras?

Use the two 1 Gbps PoE ports for cameras that need higher bandwidth or longer cable runs; the two 100 Mbps PoE ports are fine for standard-definition cameras or access points with lighter traffic.

What does the 52 W total PoE budget mean when I connect devices?

The switch can supply up to 30 W on any single PoE port, but the combined draw of all four PoE ports cannot exceed 52 W, so plan your camera power ratings accordingly.

How far can I run a PoE link over the RJ45 uplink?

The manufacturer states PoE power and data can reach up to 250 meters on the PoE ports; the single 1 Gbps uplink port follows standard Ethernet distance limits.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.