We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with single RJ45 port and metal bracket

GLOTRENDS

GLOTRENDS ST7357 10Gb PCIe 3.0 x4 network card, single RJ45, AQC107

SKU CH-07PF-H0N1C MPN ST7357

Adds a single RJ45 port running at 10G, 5G, 2.5G, 1G or 100M over Cat 6a or Cat 5e via a PCIe 3.0 x4 slot using the AQC107 controller

  • 10 Gb/s networking over standard copper with Aquantia AQC107 controller
  • PCIe 3.0 x4 host interface provides full 10 Gb/s throughput
  • Auto-negotiates 10G, 5G, 2.5G, 1G and 100M links on Cat 6a or Cat 5e
  • Works with Windows, Linux and macOS without extra drivers
  • Includes full-height and low-profile brackets for any chassis

10Gb PCIe 3.0 x4 NIC for copper networks

This single-port RJ45 adapter uses the Aquantia AQC107 controller to deliver up to 10 Gb/s over twisted-pair cabling. It fits a PCIe 3.0 x4 slot and includes both full-height and low-profile brackets for flexible installation. The card targets workstations and servers that need faster wired throughput without moving to fibre.

Copper reach limits at each speed tier

Cat 6a cable supports the full 10 Gb/s rate up to 100 metres, while Cat 5e tops out at 5 Gb/s over the same distance. The controller negotiates down through 2.5 Gb/s, 1 Gb/s and 100 Mb/s automatically, so legacy cabling still works but cannot reach the highest tier. Flow control and IEEE 802.3bz NBASE-T compliance keep the link stable across all supported rates.

One 10 Gb/s lane with 9 KB jumbo frames

A single RJ45 port handles multi-gigabit traffic for file transfers, virtualisation hosts or backup targets that saturate 1 Gb/s links. Jumbo frames up to 9 KB reduce CPU overhead on large payloads, and QoS plus AVB tags help prioritise time-sensitive streams. Systems needing more than one 10 Gb/s copper port or fibre connectivity will require a different adapter.

Highlights

  • 10 Gb/s networking over standard copper with Aquantia AQC107 controller
  • PCIe 3.0 x4 host interface provides full 10 Gb/s throughput
  • Auto-negotiates 10G, 5G, 2.5G, 1G and 100M links on Cat 6a or Cat 5e
  • Works with Windows, Linux and macOS without extra drivers
  • Includes full-height and low-profile brackets for any chassis

Specifications

No published specifications for this item yet.

Questions about this item

Which GLOTRENDS 10Gb model should I pick if I need a single RJ45 port on PCIe 3.0 x4?

The ST7357 uses the AQC107 controller on a PCIe 3.0 x4 slot and provides one RJ45 port supporting 10G/5G/2.5G/1G/100M speeds.

What throughput will I actually see from the 10Gb rating on this card?

The AQC107 negotiates 10G, 5G, 2.5G, 1G or 100M depending on the cable and switch; with Cat 6a you can run the full 10Gb/s rate up to 100 metres.

Does the PCIe 3.0 x4 interface limit the 10GbE port in any way?

PCIe 3.0 x4 provides ample bandwidth for a single 10GbE link, so the slot does not cap the AQC107's 10G/5G/2.5G/1G/100M capability.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.