GLOTRENDS ST113 PCIe Sound Card SSS1700 ES9018K2M 7.1 192KHz
PCIe x1 sound card with SSS1700 controller and ES9018K2M DAC delivering 7.1 surround at 192 kHz via analogue and digital outputs
- Specifications192 KHz, Surround, 7.1, pci_express_x1, Desktop, 18 L x 15 W
- FeaturesSurround, pci_express_x1, 192 KHz, 7.1, ST111 7.1 Channel In
- Package ContentsST111 7.1 Channel Internal PCI-e Gaming TXCO Stereo Surround
- Studio-grade audio with SSS1700 and ES9018K2M dual-chip decoder
- 1 surround at 192 kHz for immersive gaming and media
- Five interfaces: 3.5 mm mic, headphone, speaker, optical and coaxial outputs
- Front-panel 9-pin header adds convenient desktop mic and headphone access
- UAC 1.0 plug-and-play on Windows, macOS and Linux
Dual-Chip PCIe Audio Upgrade
The GLOTRENDS ST113 adds a dedicated SSS1700 controller plus an ES9018K2M 32-bit DAC to a desktop PC through a single PCIe x1 slot. It delivers 7.1-channel analogue surround at up to 192 kHz and provides 3.5 mm microphone, headphone and speaker jacks alongside optical and coaxial S/PDIF outputs. A standard 9-pin front-panel header brings those connections to the chassis front for easier access.
Replacing Onboard Audio
This card targets users whose motherboard audio sounds noisy, lacks surround channels or cannot drive higher-impedance headphones cleanly. The jump is worthwhile when you need simultaneous analogue and digital outputs, front-panel convenience or measurable distortion reduction for critical listening. It will not satisfy buyers who require DSD playback or sample rates beyond 24-bit/96 kHz because the UAC 1.0 link caps transmission at 12 Mbps.
Check Your System First
Verify a free PCIe x1 slot and confirm your operating system supports UAC 1.0 plug-and-play; Windows, macOS and Linux are covered. Ensure the chassis has room for a low-profile bracket and that the 9-pin front-audio header matches your case wiring. No external power connector is needed, so the slot alone supplies the card.
Highlights
- Studio-grade audio with SSS1700 and ES9018K2M dual-chip decoder
- 1 surround at 192 kHz for immersive gaming and media
- Five interfaces: 3.5 mm mic, headphone, speaker, optical and coaxial outputs
- Front-panel 9-pin header adds convenient desktop mic and headphone access
- UAC 1.0 plug-and-play on Windows, macOS and Linux
Specifications
| Brand | GLOTRENDS |
|---|---|
| Model | ST113 |
| Specifications | 192 KHz, Surround, 7.1, pci_express_x1, Desktop, 18 L x 15 W x 3 H centimeters, 0.14 kilograms, false |
| Features | Surround, pci_express_x1, 192 KHz, 7.1, ST111 7.1 Channel Internal PCI-e Gaming TXCO Stereo Surround Sound Card, false |
| Package Contents | ST111 7.1 Channel Internal PCI-e Gaming TXCO Stereo Surround Sound Card |
Questions about this item
What PCIe slot and case space does the ST113 need?
The ST113 uses a PCIe x1 slot and measures 18 cm long by 15 cm wide by 3 cm high, so check that your motherboard has a free x1 lane and the case can accommodate those dimensions.
How is the ST113 installed and which header do people miss?
Insert the card into a PCIe x1 slot, secure the bracket, then connect the 9-pin front-panel audio header to the motherboard; skipping that header leaves the front mic and headphone jacks dead.
What upkeep will the ST113 need later?
No moving parts or batteries are present; just keep the 3.5 mm MIC-IN, PH-OUT, SPK-OUT and SPDIF optical and coaxial ports dust-free and reseat the card if a future motherboard change causes detection issues.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115038BTC
In stock
