We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two USB programmers with toggle switches and five small ESP-01S Wi-Fi modules with pin headers

globalcrown

globalcrown ESP8266 ESP-01S 4MB Wi-Fi adapter kit (2 programmers + 5 modules)

SKU CH-WHAN-QH2QM

Kit supplies five ESP-01S modules with 4 MB flash and two CH340G USB programmers featuring a mode toggle for AT-command debugging or firmware flashing

  • TypeUSB Wi-FI Adapter
  • 4 MB flash stores larger firmware than 1 MB modules
  • Toggle switch selects UART debugging or programming mode
  • CH340G USB-to-serial chip enables direct computer connection
  • Modules plug straight into programmers without extra wiring
  • Kit includes five modules and two programmers for parallel development

Kit contents

This kit supplies five ESP-01S Wi-Fi modules with 4 MB flash memory and two USB programmer boards. It is aimed at hobbyists, students and engineers prototyping wireless IoT devices or learning AT-command firmware control.

Power and thermal behaviour

Each module draws modest current from the USB port during normal transmit and receive cycles. The CH340G USB-to-serial chip on the programmer runs cool and silent because it has no active cooling or high-power regulation circuitry.

Deciding specification

The 4 MB flash capacity determines whether your firmware image and file system will fit; smaller 1 MB modules cannot hold the same code. Buyers who need more storage must select a different module.

Highlights

  • 4 MB flash stores larger firmware than 1 MB modules
  • Toggle switch selects UART debugging or programming mode
  • CH340G USB-to-serial chip enables direct computer connection
  • Modules plug straight into programmers without extra wiring
  • Kit includes five modules and two programmers for parallel development

Specifications

TypeUSB Wi-FI Adapter

Questions about this item

How do I plug the ESP-01S module into the USB programmer and which switch position do I use for flashing?

Align the module pins with the yellow header on the programmer and press it straight in; slide the on-board toggle to the PROG side before flashing firmware.

What driver must be present on my computer before the programmer appears as a serial port?

The CH340G USB-to-serial chip requires its driver installed; without it the device will not enumerate as a COM port.

What practical limit appears first when the module runs continuously at full transmit power?

The ESP8266 chip draws peak current during TX bursts, so a weak USB supply will brown-out the module before thermal limits are reached.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.