We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short black Y-splitter cable with one 8-pin female end and two 8-pin male ends

GinTai NE3401 8-Pin GPU Female to Dual PCIe 8-Pin Male 10cm

SKU CH-G3M8-M4Q81

Converts a single PSU 8-pin GPU connector into two PCIe 8-pin plugs for NVIDIA Tesla cards, using 18AWG copper wire rated to 600W

  • TypeSATA
  • ColorBlack
  • Lengthinches 4
  • Cable Length4 in.
  • SpecificationsNE3401, SATA, Black, 0.043 kilograms, GinTai
  • Connector ASata
  • Converts one 8-pin GPU connector to dual PCIe 8-pin plugs
  • 10 cm length fits tight builds
  • 18 AWG copper core delivers up to 600 W
  • Secure latches on every connector prevent accidental disconnects
  • Designed for Tesla K80, M40, M60, P40, P100 and CMP 170HX

Power Conversion

This GinTai NE3401 cable converts a single 8-pin GPU female connector from a power supply into two 8-pin PCIe male connectors for a graphics card. It is built for NVIDIA Tesla K80, M40, M60, P40, P100 and CMP 170HX cards that require dual 8-pin power input. The 10 cm length suits compact workstation or server builds.

Installation Notes

The Y-splitter plugs directly into the PSU's existing 8-pin GPU output and the card's two 8-pin sockets with no tools required. Latches on every connector click into place to prevent accidental disconnection during transport or vibration. The wire uses 18AWG tinned copper rated for the application. Do not use this cable for CPU EPS 12V sockets; the pin-out is different and damage will occur.

Deciding Specification

The single specification that determines fit is the 600 W maximum power rating across the dual 8-pin outputs. If the target graphics card draws more than 600 W total, this splitter cannot deliver safe, stable power and a separate PSU cable per connector is required. Buyers needing higher per-connector current or CPU EPS compatibility must choose a different cable.

Highlights

  • Converts one 8-pin GPU connector to dual PCIe 8-pin plugs
  • 10 cm length fits tight builds
  • 18 AWG copper core delivers up to 600 W
  • Secure latches on every connector prevent accidental disconnects
  • Designed for Tesla K80, M40, M60, P40, P100 and CMP 170HX

Specifications

BrandGinTai
ModelNE3401
TypeSATA
ColorBlack
Lengthinches 4
Cable Length4 in.
SpecificationsNE3401, SATA, Black, 0.043 kilograms, GinTai
Connector ASata
Connector BSata
Connector Detail1 x eSATA to 1 x eSATA
Terminal GenderMale to Female
ConstructionPlastic or Rubber
Refresh Rate4 inches
FeaturesSATA, Black, GinTai, NE3401

Questions about this item

How can I confirm the GinTai NE3401 cable is delivering stable power to my GPU after connecting it?

Verify the dual latches click securely into both the PSU 8-pin and each graphics-card 8-pin socket, then monitor GPU voltages in software to ensure they remain steady under load.

What comes in the package and is anything else required to use the NE3401 with a Tesla K80 or similar card?

The box contains one 10 cm Y-splitter cable with an 8-pin GPU female input and dual 8-pin PCIe male outputs; no extra parts are needed if your power supply has a spare 8-pin GPU connector.

Which version of the GinTai NE3401 should I choose for a CMP 170HX or other 8-pin NVIDIA GPU?

The single listed model NE3401 is built for any NVIDIA GPU with an 8-pin input — including Tesla K80, M40, M60, P40, P100 and CMP 170HX — so select this one.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.