We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gold silk PLA filament spool, 1.75 mm diameter, 1 kg weight

GIANTARM 700-001-1216 Silk Gold PLA Filament 1.75mm 1kg

SKU CH-6JR1-VZ5A0

Silk Gold PLA filament on a 1 kg spool with ±0.03 mm diameter accuracy for smooth, shiny prints without polishing

  • ColorSilk Gold
  • MaterialPolylactic Acid
  • Diameter1.75
  • Weight1 kilograms
  • Silk-like finish without polishing thanks to Silk Gold PLA formulation
  • Consistent 1.75 mm diameter held to ±0.03 mm for reliable extrusion
  • 24-hour drying and vacuum sealing with desiccant prevent moisture-related clogs
  • Broad FDM printer and pen compatibility from mechanical winding and manual inspection
  • Print-ready temperatures 190–215 °C nozzle and 40–60 °C bed simplify setup

GIANTARM Silk Gold PLA 1.75 mm Filament

This GIANTARM Silk Gold PLA filament is a 1 kg spool of 1.75 mm polylactic acid designed for FDM 3D printers and 3D printing pens. It targets makers who want a shiny silk-like finish straight from the nozzle without post-processing.

Thermals noise and power in normal use

The material prints at a nozzle temperature of 190 to 215 and a bed temperature of 40 to 60. The spool is dried for 24 hours before vacuum sealing with desiccant to minimise moisture-related extrusion issues during typical printing sessions.

Behaviour under sustained load

Mechanical winding and manual inspection keep the filament tangle-free over long prints while the dimensional accuracy of +/- 0.03 mm supports consistent layer adhesion. Vacuum packaging with a re-sealable bag helps maintain dryness across multiple extended jobs.

Highlights

  • Silk-like finish without polishing thanks to Silk Gold PLA formulation
  • Consistent 1.75 mm diameter held to ±0.03 mm for reliable extrusion
  • 24-hour drying and vacuum sealing with desiccant prevent moisture-related clogs
  • Broad FDM printer and pen compatibility from mechanical winding and manual inspection
  • Print-ready temperatures 190–215 °C nozzle and 40–60 °C bed simplify setup

Specifications

BrandGIANTARM
Model700-001-1216
ColorSilk Gold
MaterialPolylactic Acid
Diameter1.75
Weight1 kilograms

Questions about this item

How do I load the 1.75 mm filament and what step do people miss?

Heat the nozzle to 190-215 °C and the bed to 40-60 °C, then feed the filament until it extrudes cleanly; the step often missed is drying the spool for 24 hours and resealing it with desiccant after every use.

What maintenance will this Silk Gold PLA need later?

Store the 1 kg spool in its vacuum bag with desiccant after each print to prevent moisture absorption; no nozzle wear additives are present, so standard brass nozzles last the spool's life.

What limit appears first during a long print with this filament?

The ±0.03 mm diameter tolerance keeps extrusion consistent, so the first limit is usually heat creep in the hot-end if cooling is insufficient, not the filament itself.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.